Shopsmith Forums

With the latest ER I got a grinding wheel and guard/tool tool rest attachment.
I looked the guard/ rest attachment over but cant figure how it mounts, uless some things are missing. Any help here would be appreciated.

ERLover wrote:With the latest ER I got a grinding wheel and guard/tool tool rest attachment.
I looked the guard/ rest attachment over but cant figure how it mounts, uless some things are missing. Any help here would be appreciated.

Pix might be useful here!

ERLover wrote:With the latest ER I got a grinding wheel and guard/tool tool rest attachment.
I looked the guard/ rest attachment over but cant figure how it mounts, uless some things are missing. Any help here would be appreciated.

Pictures?? Is it SS?

I have the grinder attachment for the MK V. It clamps to the quill housing the same as many other things. The 10ER is the same diameter at the end of the depth stop collar so the MK V grinder should clamp to it although I have never tried.

Charging the battery camera, it will be a bit b4 pics. The grinding wheel with a SS Arbor and this guard were in the Bling Box, so I am assuming it is SS ER. On the guard there is a small sticker that sez "use supplied self tapping screws to attach wheel guard to grinder". So now I am guess it is not SS. I will get a pic out though in a bit.

If I remember correctly, my SS grinder package used self tapping screws to attach the guard. Not able to go look at this time, but pretty sure about it.

Here are the pics, I had a thought, maybe there is another side to it and it is missing.

It dose not look my grinder. I don't think Magna ever made a grinder for the 10ER although the MK V should work I think.

John it is not ER vintage, the paint/powder coating is too nice. must have been from something else.