Shopsmith Forums

It was just plain unpleasant working in the garage today but I wanted to take advantage of some free time to get a few things done so I put up with it. Worked a little slower, taking a brake from time to time to get out in the breeze and cool down.

Back in 2012 I put together some shelving units as shown here:

http://www.shopsmith.com/ss_forum/gener ... 8-s10.html

One thing I've found out is that I really needed a dedicated place to put the tool boxes to open them and root around or just to take the tools out that I needed. I've been making due because I had not included a shelf in the design. Well the more I thought about it I really needed a shelf and where there is a will there is a way.

I picked up a couple of drawer slides at Menard's during their 11% sale and it looked like I could just fit a shelf in. So today I stated working on making it happen.

I still have to add a grip/pull to it but that is no big deal now that everything is fitted in.

I did manage a couple of picture so you can see what I'm talking about.
It is at a nice height for me to work at and I could even use it as a desk if I wanted to. It can be used with both the shelf units as they are next to each other. The other shelf with storage bins is going to be more tricky as there is no room for the slides there. Well that is another issue.

Anyway if anyone decides to build something like this you might want to design in a pull out shelf.

Ed

Reible/Ed I think I posted it here a fan from Menards, kinda like a barn fan, and ya you still will get hot, but that 4pm shower b4 cocktail time will feel good, we had a cool front come in just 86* and dry air cooler the next few, I think only in the mid 70s for the weekend.

Reiblbe/Ed this is the fan I bought
http://www.menards.com/main/heating-coo ... 1153850791

I am happy with it in the garage, but the air flow is very focused by about 3-5 feet depending on speed and distance away from it. I have it about 6 ft away, just at that spacing to have it, if I move a bit out of its focus I am in no air flow from it, I have to adjust its angle/direction on me. I am totally happy with it though.
I have it sitting on the floor but can be hung, comes with hardware for that.

Add a self rotating deflector.

That shelf is a great idea!

Angle iron(or similar) between the shelf bottom and the slide?

A great idea and nicely done!

Nice idea Ed and handy too!!!!!!!. An other horizontal surface to accumulate something

JPG wrote:Add a self rotating deflector.

Good Idea JPG but where to get it?

ERLover wrote:

JPG wrote:Add a self rotating deflector.

Good Idea JPG but where to get it?

I have two 30" Air King oscillating fans that work great. When it gets in the high 90's it is a little warm but not too bad. 70's and 80's I just open the windows and it is perfect. There is almost always a breeze.