Shopsmith Forums

Thanks, Skizzity and others!
I knew the plans were available somewhere on the net. I was looking for Neck Engler posts on the forum and was only thinking of going to the "Workshop Companion". You did good, Skizzity!

Although the written text is a bit rough, the diagram plans and cutting list are clear and sharp. They are listed about halfway down the Workshop companion forum discussion that's posted above.

Boy, I found those pdfs hard to read!

Has anyone built this? If you have, please post photos!

I saw Dusty was working on one per the linked thread. Did you ever finish it, Dusty?

An excellent example of search engines not getting what is needed.

Search for mark .5 and you get mark 5 with no attention paid to the ".".

I know there is at least one thread relating to building a mark .5.

Good old google image search for "shopsmith mark .5 toy" came up with this.

http://www.shopsmith.com/ss_forum/viewt ... 138#p70138

There's a copy someone sent me some time ago at https://drive.google.com/drive/folders/ ... nk1ZVl5eU0

everettdavis wrote:There's a copy someone sent me some time ago at https://drive.google.com/drive/folders/ ... nk1ZVl5eU0

Kudos!!!

https://www.workshopcompanion.com/Mini- ... h-Plan.pdf

I put this up to help you folks that are participating in Okie Jim's Build-Along. It's been reformatted so you can easily print it out on ordinary letter-size paper. -- Nick

Welcome back Nick!!!!!!! Missed Thee!!!