Page 1 of 1
Scroll Saw
Posted: Thu Sep 29, 2016 11:32 am
by Albertt62
Hi,
I purchased a scroll saw on eBay. No manual.
Is the gray scroll saw the same as the new teal colored one?
Thank you!
Re: Scroll Saw
Posted: Thu Sep 29, 2016 11:33 am
by Albertt62
This is a gray scroll saw, not the jig saw.
Re: Scroll Saw
Posted: Thu Sep 29, 2016 1:15 pm
by reible
The gray version is the older one and there were a couple of variations of that. It is similar to the newer teal version but they are not the "same".
You can check with shopsmith to see if they still have a manual for the older model. If you are lucky enough to have a sticker still on the machine with date code that would be a good reference as to which one you have.
Parts are no longer necessarily available. Some are and some are not so be aware you may have to make do or reinvent parts.
If it hasn't already had the upgrades they are worth it in my book.
Ed
Re: Scroll Saw
Posted: Thu Sep 29, 2016 1:17 pm
by joedw00
Re: Scroll Saw
Posted: Thu Sep 29, 2016 2:19 pm
by hdoilcan
What are the differences between the grey and the teal?
Re: Scroll Saw
Posted: Thu Sep 29, 2016 10:16 pm
by Albertt62
Thank you
Re: Scroll Saw
Posted: Thu Sep 29, 2016 11:18 pm
by JPG
hdoilcan wrote:What are the differences between the grey and the teal?
Color, blade mount(etc.) and tension adjustment.
The latter two are available as an upgrade.
Re: Scroll Saw
Posted: Sat Oct 01, 2016 12:28 pm
by reible
There are other changes inside so while some parts might be interchangeable others will not.
As an example the arm bushings are no longer available from shopsmith but you can purchase something close and then turn them to fit. Both JPG and I have done that and it's not difficult task but not all here are going to want to do that.
I also believe hearing the rear table mounting is different and replacement parts are not to be had. Again work a-round's exist but.........
I'm not sure if the question was relating to the outwards appearance or more of the internals. Changes both places.
Ed
Re: Scroll Saw
Posted: Wed Nov 02, 2016 10:41 pm
by Culprit
The $11.99 gray scroll saw reference packet from the MS contains the owners manual and parts listing.
http://www.shopsmith.com/ownersite/item ... tem=877087
I don't know if this covers your model/year or not. It says for 555220 and 555272.