10 ER Shaper Fence

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderators: HopefulSSer, admin

e2512
Gold Member
Posts: 50
Joined: Sat Mar 22, 2014 4:10 pm

Re: 10 ER Shaper Fence

Post by e2512 »

Thanks everyone!
bshaffer50
Bronze Member
Posts: 2
Joined: Wed Apr 27, 2022 6:06 pm

Re: 10 ER Shaper Fence Washers

Post by bshaffer50 »

e2512 do you have any of the washers for the 10Er shaper fence?
Thanks,
Bill
User avatar
chapmanruss
Platinum Member
Posts: 3449
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: 10 ER Shaper Fence

Post by chapmanruss »

I don't know if Tom sells those spacers for the Jointer/Shaper Fence any longer. I haven't seen them listed on ebay for some time. This thread is over 5 years old so the link for ebay is out of date.

You could easily make a pair. Make them out of 1/4" thick wood using a 1-1/4" hole saw having a 1/4" pilot bit. They don't need to be exactly 1-1/4" in diameter. You could make a pair out of aluminum that is 1/4" thick and 1-1/4" square with a 1/4" hole in the center. They wouldn't really need to be round.
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
bshaffer50
Bronze Member
Posts: 2
Joined: Wed Apr 27, 2022 6:06 pm

Re: 10 ER Shaper Fence

Post by bshaffer50 »

chapmanruss,
Tom is not currently making the spacers.
Thanks for the dimensions
Post Reply