Shopsmith Forums

I moved and I can't find anything.

Does anyone have the O.D. of the original shaper fence (10 ER) washer/spacer?

I do know the I.D is 1/4" and the thickness is 1/4". The part number is 129-21 per the manual.

Thanks in advance.
Tom

Could you post a copy of your manual and a photo of your fence.
The manual I found a manual on Vintage Machinery doesn't show that part number. http://vintagemachinery.org/pubs/338/2712.pdf
That said there was more that one version of the shaper fence made.

FWIW that is a Mark 5 shaper fence which was also used on A 10 E/R after the M5 was introduced.

Somebody has to have them. I hope I don't have to dig out every box to find mine. Moving is a pain. I'll never find everything.

e2512 wrote:Somebody has to have them. I hope I don't have to dig out every box to find mine. Moving is a pain. I'll never find everything.

Hogwinslow has them listed on eBay for $5. I can measure the outside diameter for you but not until tomorrow.

http://www.ebay.com/itm/Shopsmith-10E-1 ... SwYHxWIbpz

jsburger wrote:

e2512 wrote:Somebody has to have them. I hope I don't have to dig out every box to find mine. Moving is a pain. I'll never find everything.

Hogwinslow has them listed on eBay for $5. I can measure the outside diameter for you but not until tomorrow.

http://www.ebay.com/itm/Shopsmith-10E-1 ... SwYHxWIbpz

e2512 is Hogwinslow.

http://shopsmith.com/ss_forum/viewtopic ... 49#p164049

BuckeyeDennis wrote:

jsburger wrote:

e2512 wrote:Somebody has to have them. I hope I don't have to dig out every box to find mine. Moving is a pain. I'll never find everything.

Hogwinslow has them listed on eBay for $5. I can measure the outside diameter for you but not until tomorrow.

http://www.ebay.com/itm/Shopsmith-10E-1 ... SwYHxWIbpz

e2512 is Hogwinslow.

http://shopsmith.com/ss_forum/viewtopic ... 49#p164049

If that is the case why does he have 6 sets listed for sale on eBay? I know he was on vacation over the holidays but I got a personal email from him last week. No mention of moving.

jsburger wrote:

BuckeyeDennis wrote:

jsburger wrote:
Hogwinslow has them listed on eBay for $5. I can measure the outside diameter for you but not until tomorrow.

http://www.ebay.com/itm/Shopsmith-10E-1 ... SwYHxWIbpz

e2512 is Hogwinslow.

http://shopsmith.com/ss_forum/viewtopic ... 49#p164049

If that is the case why does he have 6 sets listed for sale on eBay? I know he was on vacation over the holidays but I got a personal email from him last week. No mention of moving.

Beats me. I simply remembered that thread I linked to.

Sorry, didn't have a lot of time before going to work yesterday and got the wrong manual.

I have now found the correct manual on Vintage Machinery. http://vintagemachinery.org/pubs/338/2705.pdf

This manual is for the 10er shaper fence with the metal fences. The fence I have has the wooden fences but looks pretty similar. Unfortunately it doesn't have the spacers installed and I can't see any in the "box of goodies" that came with it. So, I'm afraid I can't be of help on this one.

The outside diameter of the spacers is 1 1/4".