Page 2 of 2
Re: 10 ER Shaper Fence
Posted: Sat Jan 21, 2017 10:52 pm
by e2512
Thanks everyone!
Re: 10 ER Shaper Fence Washers
Posted: Tue Jul 12, 2022 3:42 pm
by bshaffer50
e2512 do you have any of the washers for the 10Er shaper fence?
Thanks,
Bill
Re: 10 ER Shaper Fence
Posted: Wed Jul 13, 2022 5:48 pm
by chapmanruss
I don't know if Tom sells those spacers for the Jointer/Shaper Fence any longer. I haven't seen them listed on ebay for some time. This thread is over 5 years old so the link for ebay is out of date.
You could easily make a pair. Make them out of 1/4" thick wood using a 1-1/4" hole saw having a 1/4" pilot bit. They don't need to be exactly 1-1/4" in diameter. You could make a pair out of aluminum that is 1/4" thick and 1-1/4" square with a 1/4" hole in the center. They wouldn't really need to be round.
Re: 10 ER Shaper Fence
Posted: Mon Aug 08, 2022 3:32 pm
by bshaffer50
chapmanruss,
Tom is not currently making the spacers.
Thanks for the dimensions