Page 1 of 1

Barbeque Grill Scraper

Posted: Thu May 11, 2017 3:11 am
by rpd
Recently I have heard stories on the radio of people who had gotten bits of wire from BBQ cleaning brushes stuck in their throats and had to have them removed at the hospital. :eek:

Last weekend when I was shopping at Costco they had a wooden paddle for scraping BBQ grills on sale. It looked like a great idea, but as a woodworker, (and cheap ;)) I couldn't see myself paying $20 for a bit of wood. :eek:

So today while I was home for lunch I grabbed a scrap piece of oak.
Grillscraperbefore.JPG
Grillscraperbefore.JPG (263.7 KiB) Viewed 8097 times
A bit of work with a hand plane, SS bandsaw, SS disk-sander, some hand sanding, and a bit of paste wax for the finish.
Grillscraper2.JPG
Grillscraper2.JPG (290.39 KiB) Viewed 8097 times
and here ready to go to work. :cool:
Grillscraper3.JPG
Grillscraper3.JPG (469.55 KiB) Viewed 8097 times
Maybe half an hour start to finish. :)

Re: Barbeque Grill Scraper

Posted: Thu May 11, 2017 8:12 am
by mountainbreeze
I like that and want to give it a try. Can you provide the dimensions?

Re: Barbeque Grill Scraper

Posted: Thu May 11, 2017 9:54 am
by rpd
mountainbreeze wrote:I like that and want to give it a try. Can you provide the dimensions?
I didn't actually measure anything, I just grabbed a piece of scrap wood that I thought looked about the right size and cut/shaped it by eye. :)

The man in this video will give the dimensions he used but it isn't critical. Look at the manufactured ones of sale, they range from the size of your hand to 20 inches long, 3 to 5 inches wide, maybe 1/2 inch to 1 inch thick, and bevelled on one or both sides.

[youtube]https://www.youtube.com/watch?v=oflBSJe6w1Y[/youtube]

Re: Barbeque Grill Scraper

Posted: Thu May 11, 2017 10:00 am
by rjent
So now you can go to the hospital to have splinters removed :D

Re: Barbeque Grill Scraper

Posted: Thu May 11, 2017 10:54 am
by masonsailor2
As an added note there is a very easy way to clean your BBQ grill. Put them in the oven on self clean mode. Cleans them effortlessly and also the oven.
Paul

Re: Barbeque Grill Scraper

Posted: Fri May 19, 2017 5:46 pm
by rpd
masonsailor2 wrote:As an added note there is a very easy way to clean your BBQ grill. Put them in the oven on self clean mode. Cleans them effortlessly and also the oven.
Paul
True, but that doesn’t provide an excuse for a woodworking project. :)

So, I have used it a few times now and the grooves are pretty well established. (high heat works best to char the grooves).
Grillscraper4.JPG
Grillscraper4.JPG (698.78 KiB) Viewed 7844 times
It does a good job to scrape loose the gobs of BBQ sauce etc. These are ceramic coated cast iron grates after scraping. A small amount of teriyaki sauce is left, but the wire brush doesn't get it al either. (Tilapia fillets make a cameo appearance on the right.)
Grillscraper5.JPG
Grillscraper5.JPG (441.25 KiB) Viewed 7844 times