Shopsmith Forums

I did a search but couldn't find any info. looking for parts for a scroll saw, the part numbers are 96,97,104,105,106,107,116,117

Most of these are not listed in their parts list but show in the diagram. They are the gear assembly and pinion assembly (broken down into separate parts).
I don't have a pinion assembly (I have a standalone selfpowered jigsaw). To convert to a mkV mounted assembly I would need the pinion assembly at a minimum. Shopsmith may have the pinion assembly but hasn't gotten back to me on that yet.
If anyone has one of these, please let me know.

tucsonguy wrote:I did a search but couldn't find any info. looking for parts for a scroll saw, the part numbers are 96,97,104,105,106,107,116,117

Most of these are not listed in their parts list but show in the diagram. They are the gear assembly and pinion assembly (broken down into separate parts).
I don't have a pinion assembly (I have a standalone selfpowered jigsaw). To convert to a mkV mounted assembly I would need the pinion assembly at a minimum. Shopsmith may have the pinion assembly but hasn't gotten back to me on that yet.
If anyone has one of these, please let me know.

116, 117, would be the accessory hub.

503572 1/2" SPT Accessory Hub
(for Jointer, Jigsaw or Scroll Saw) ... $6.99

Thanks!

What I really need is the gear for the motor in the table, but if I can't get that (I have an email sent to SS) then I need to convert to using it on the MarkV. That will mean a new weight arm assembly as well as the pinion assembly, as the one connecting to the motor is in very sad shape. Plus the one with the motor gear lacks the bushing that keeps the two bearings separated and thus locks the assembly in place.