Shopsmith Forums

Got a handful of parts that I'm not sure what they are or what number they are.

trying to sell them anyone here maybe could identify?

If you post pictures, I'm sure someone can try.

Not everyone likes to click on links to photo-hosting sites, so it would be more convenient if you could post pictures here. Keep pixel size under 2050 wide and under 1180 high and under 2 MB per picture. Maximum of 10 pictures per post. If you need more help in figuring out how to post pictures, look for a post entitled "How to Post a Picture" (currently on page 7 of the Community Forum, last post dated Sept 30, 2018)

part number 1

part 2

part 3

Don't know if this helps but don't have part numbers, but first is tool hub(or for on the head) for a power mount adapter. Second is a arbor for saw or grinder etc missing nut add washers. Last is cutter guard for the jointer.

Bob

Part 1 is the Upper Drive Hub Assembly (includes set screw), the current part number is 503570. Yours looks to be a older one maybe from a Greenie or Goldie Mark 5. It may have came from the Power Mount Coupler Kit P/N 22 001.

Part 2 is P/N 22 031 the 5/8" Arbor missing the machined spacer, 2 machined washers, keyed washer and nut. Made from 1954 to 1964. In 1964 this arbor became P/N 505506 (version 1) named the 5/8" Universal Arbor and the black protective coating was added. The current 505506 (version 4) is now the 5/8" Molder/Dado Arbor.

Part 3 is P/N 502653 the Cutter Guard Assembly from the older 4" Jointers. Yours would be from sometime between 1973 and the early 1980's. These guards still had the Magna "M" with a Shopsmith Inc. sticker. This guard has been replaced by the current Jointer Feather Guard and can be bought as a retro fit P/N 555480.

THANKS