Page 1 of 1
pdf manuals
Posted: Sat Feb 02, 2019 2:17 pm
by timinalaska
Hello Tim here and a new member. I just purchased a shopsmith 510 along with accessories - thickness planer not pro - jig saw - band saw -and belt sander. I know nothing about the shopsmith tools but got them for my very limited space garage.
no manuals were included. could you advise where I might go to get a operations and maint pdf manual for these. I spent most of my fortune obtaining these so would like to get freebies if possible. thanks and looks like I was lucky to find this forum Best regards Tim
Re: pdf manuals
Posted: Sat Feb 02, 2019 2:30 pm
by everettdavis
Go to this post and follow the link
http://www.shopsmith.com/ss_forum/viewt ... 90#p185690 to the downloadable summary manuals at the bottom which Shopsmith provides free of cost. Equally they sell original manuals on their site if you want a full printed manual.
You also will want to visit the Power Tool Woodworking For Everyone link also listed there.
If you go into the My Google Drive link you will find a host of other files too large to post here in the forums, that should be of interest to you.... all free. Some of those PDF manuals you seek for special purpose tools are there also in PDF form.
Welcome to the family!
Everett
Re: pdf manuals
Posted: Sat Feb 02, 2019 8:46 pm
by rpd
timinalaska wrote:Hello Tim here and a new member. I just purchased a shopsmith 510 along with accessories - thickness planer not pro - jig saw - band saw -and belt sander. I know nothing about the shopsmith tools but got them for my very limited space garage.
no manuals were included. could you advise where I might go to get a operations and maint pdf manual for these. I spent most of my fortune obtaining these so would like to get freebies if possible. thanks and looks like I was lucky to find this forum Best regards Tim
Welcome aboard.
You can download the bandsaw manual here.
http://www.shopsmith.com/ownersite/productmanuals.htm
The belt sander manual here.
http://vintagemachinery.org/pubs/detail.aspx?id=6083
And the jigsaw manual here.
http://vintagemachinery.org/pubs/detail.aspx?id=10571
There is also a Pro Planer manual here. shares a lot of features with the SS mounted planer so should be of some help.
http://vintagemachinery.org/mfgindex/de ... =747&tab=3
Re: pdf manuals
Posted: Sat Feb 02, 2019 11:25 pm
by timinalaska
thank you all for the replies appreciate your time and help Tim