Page 1 of 2
Identifying Shopsmith Arbors
Posted: Sat Jun 29, 2019 3:42 pm
by chapmanruss
In a recent post I included a picture showing the Shopsmith arbors that was incomplete. Below are pictures of all the Shopsmith arbors I know of except the 1/2" Router Chuck P/N 505597 version 1 and is the only one I do not have. Also posted here is the PDF I created listing all the arbors plus additional information. I believe this list is complete.
The following note is incorrect and I cannot edit it out
The attachment $matches[2] is no longer available
- Arbors page 1 - labeled.jpg (215.59 KiB) Viewed 32373 times
- Arbors page 2 - labeled.jpg (202.36 KiB) Viewed 32373 times
- Router Chucks - labeled.jpg (226.53 KiB) Viewed 32373 times
- Shaper Adapters-Spindles - labeled.jpg (237.49 KiB) Viewed 32373 times
NOTE: This is the current PDF as of 4/5/20.
I hope this information is helpful in identifying arbors for the Shopsmith tools. If you find any errors let me know so I can update my lists.
Below, for reference is the Sawsmith only arbors. The three hex nut style were for the RAS and the other that looks like 555608 was for the table saw it was also P/N 555572.
...
Re: Identifying Shopsmith Arbors
Posted: Sat Jun 29, 2019 4:48 pm
by RFGuy
Russ,
Excellent! Thanks for putting this together. It is a great reference to have.
Re: Identifying Shopsmith Arbors
Posted: Sun Jun 30, 2019 11:01 am
by JPG
WOW!!!
Re: Identifying Shopsmith Arbors
Posted: Sun Jun 30, 2019 11:51 am
by rpd
Thank you Russ,
This is a great resource for the Shopsmith community.
Re: Identifying Shopsmith Arbors
Posted: Sun Jun 30, 2019 1:41 pm
by chapmanruss
Below is a picture of the Shopsmith Drill Chuck Assemblies used through the years along with a PDF description of the Drill Chucks.
- Drill Chucks - labeled.jpg (260.85 KiB) Viewed 32275 times
The picture below is the current style Drill Chuck showing the three different SS Logos.
- Current style Drill Chucks - labeled.jpg (228.03 KiB) Viewed 32275 times
...
Re: Identifying Shopsmith Arbors
Posted: Sun Jun 30, 2019 2:23 pm
by jsburger
This and the arbor identification are great resources. Now when someone has a question on either item the info is all in one place. Great job and thanks for posting.
Re: Identifying Shopsmith Arbors
Posted: Mon Jul 01, 2019 11:42 am
by JPG
jsburger wrote:This and the arbor identification are great resources. Now when someone has a question on either item the info is all in one place. Great job and thanks for posting.
And thanks for 'collecting' them.
Re: Identifying Shopsmith Arbors
Posted: Mon Jul 01, 2019 12:11 pm
by RFGuy
I noticed the Shopsmith Keyless 5/8" drill chuck (556273) wasn't included in your picture, but I assume this might be because you don't have one yet. I am curious if this keyless chuck is manufactured by Shopsmith, or if this chuck is an off the shelf chuck from another brand and just mated to an adapter (JT3 mount perhaps) to fit the Shopsmith. I notice there is no Shopsmith logo on this part # 556273.
- keyless_chuck.jpg (16.45 KiB) Viewed 32047 times
Re: Identifying Shopsmith Arbors
Posted: Mon Jul 01, 2019 10:03 pm
by Hobbyman2
Nice info Thank You !!
Re: Identifying Shopsmith Arbors
Posted: Mon Jul 01, 2019 10:42 pm
by rjent
Outstanding work! Great reference material! Thank you ....
Shopsmith Arbors 04-20.pdf