Shopsmith Forums

Posted: **Mon Oct 21, 2019 8:03 pm**

Hello, I am a brand new owner of a Shopsmith Mark V 510. Firstly, thank you for all the incredible documentation here and on the Google Drive link for Shopsmith owners.

I have just bought a 510 with the bandsaw attachment.

I am currently performing cleaning and maintenance as described in the manual and here in the forum.

Also, could you look at the pictures of the speed control I will post. It looks almost "misthreaded" to me. It is sticky and does not turn fluidly. I know not to turn it with the machine off but I'm so sure about the previous owners though.

Update: I added a picture of the gear. I cleaned it with mineral oil removing all the gunk.
Thank you,
Jeff

Shopsmith Serial Plate:

: Shopsmith Serial Plate; shopsmith_markv_510_serial.png (560.55 KiB) Viewed 4740 times

Bandsaw Serial Plate:

: Bandsaw Serial Plate; shopsmith_bandsaw_serial.jpg (747.68 KiB) Viewed 4740 times

Speed Dial Pictures:

: Speed Dial 1; speed_dial_1.jpg (853.92 KiB) Viewed 4740 times

: Speed Dial 2; speed_dial_2.jpg (210.4 KiB) Viewed 4740 times

Speed Control Gear:

: speed control gear; gear.JPG (33.76 KiB) Viewed 4709 times

Posted: **Mon Oct 21, 2019 8:18 pm**

On the first page of Shopsmith Large Format Drawings Illustrations and More in Maintenance and Repair Forum, down just below the My Google Drive link, download the Bill Mayo Headstock Improvement Kit document.

It outlines in detail with photos, how to inspect, repair and adjust the Speed Control Mechanism.

The late Bill Mayo’s vast experience within that document will get you on the right path.

Everett

Posted: **Mon Oct 21, 2019 8:33 pm**

Thank you Everett!

Shopsmith Forums

New owner of a Shopsmith Mark V 510

New owner of a Shopsmith Mark V 510

Re: New owner of a Shopsmith Mark V 510

Re: New owner of a Shopsmith Mark V 510