Page 1 of 2
Parts Identification
Posted: Wed Apr 22, 2020 6:45 pm
by shoedo
What is this and what is it used for?
Re: Parts Identification
Posted: Wed Apr 22, 2020 6:53 pm
by jsburger
The top one looks like a set of SS band saw guide blocks. The second one is a SS planer knife setting jig. The bottom two, I don't know. They don't look like anything from SS that I have seen
Re: Parts Identification
Posted: Thu Apr 23, 2020 10:50 am
by shoedo
Thanks for your input.
Re: Parts Identification
Posted: Thu Apr 23, 2020 8:32 pm
by damagi
Bottom two appear to be planer outfeed rollers that are missing the rubber perhaps. would need a better photo.
Re: Parts Identification
Posted: Thu Apr 23, 2020 8:39 pm
by jsburger
damagi wrote:Bottom two appear to be planer outfeed rollers that are missing the rubber perhaps. would need a better photo.
No. The planer knife setting gauge above is about 5" long. Planer rollers are 12+" long.
Re: Parts Identification
Posted: Fri Apr 24, 2020 12:02 pm
by Don1519
Planer elevator screws?
Re: Parts Identification
Posted: Fri Apr 24, 2020 1:26 pm
by shoedo
Sorry about the poor quality of the initial photo. Having trouble with an old camera.
Re: Parts Identification
Posted: Fri Apr 24, 2020 11:40 pm
by JPG
Go back and read post by Don1519.
Re: Parts Identification
Posted: Sat Apr 25, 2020 10:23 am
by shoedo
Thank you! I looked at the Shopsmith planer exploded diagram but when I click on number 59, it doesn't work like it should to provide additional information. At least I know that the part belongs with the planer.
Re: Parts Identification
Posted: Sun Apr 26, 2020 10:03 am
by Don1519
[attachment=0]71496CD2-6573-435E-99EE-BD34E7B59D4C.jpeg