Shopsmith Forums

Hello all, long time who-smith owner coming back into the fold. I just picked up a 510 with lots of accessory bits but missing a few things. I got a beautiful strip sander but without the table. Should anyone have one I would be interested in it.

I also need to find the size for the machine screw #261 for the miter safety grip. Shopsmith doesn't sell that screw so i would have to buy the complete safety grip for one screw!

Any help on the above items will be appreciated. I am located on Whidbey Island in the state of Washington.

Phil

Welcome to the forum. 261 is a Phillips drive screw, #10 - 32 TPI X 1-1/4" long. I believe the head type is called Phillips Fillister. It is similar to a socket head cap screw, but I did not check head dimensions for compatibility.

- David

Thanks, now I can find a replacement for the missing screw.

Phil

It does not NEED to be a phillips head. It DOES need to be a fillister head.