Page 15 of 41
Installing 2 Brands of Urethane Bandsaw Tires on a Shopsmith Bandsaw
Posted: Mon Feb 15, 2021 7:52 am
by Chad
- 62.jpg (7.78 KiB) Viewed 1581 times
Watch it here: https://www.youtube.com/watch?v=MIcnerD ... B&index=62
I finally got around to installing new urethane tires on a couple of my Shopsmith bandsaw, but just to make it fun I decided to test two brands: The Blue Max and Polytech. I'll be the first to admit that this was a totally different experience from installing stock rubber tires and I look forward to responding to your Questions, Comments & Cheapshots in the mid-week follow-up, so be sure to type something in the video comment section.
Here's the video where I removed the upper wheel on the Shopsmith bandsaw:
https://youtu.be/H1YPHGeYYC8
Here's the video where I removed the lower wheel from the Shopsmith bandsaw:
https://youtu.be/XJ4Tzn0RsD4
Visit
http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at
http://www.tool-hunter.com/shopsmith-...
and http://shopsmith-tool-hunter.blogspot...
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!
Stumped? Q&A: Shopsmith Bandsaw Urethane Tire Replacement, Solvent for Removing Adhesive Residue?
Posted: Fri Feb 19, 2021 9:42 am
by Chad
- 63.jpg (8.67 KiB) Viewed 1534 times
Watch it here: https://www.youtube.com/watch?v=d0oY4vj ... B&index=63
Let's tackle the Questions, Comments & Cheap-Shots from this past weekend's video on installing new urethane tires on a couple of my Shopsmith bandsaw. Just to make it fun I decided to test two brands: The Blue Max and Polytech. If you missed that episode you can catch it here:
https://youtu.be/MIcnerDwTcg
Here's Robert's blog, where he shared pics of his tire installation process: https://odinstoyfactory.robertkeeney....
Here's the video of the "Worlds Easiest Method for Installing Urethane Bandsaw Tires":
https://youtu.be/3uP_VtV1SbY
Here's Nick Engler's new "Workshop Companion" channel:
https://www.youtube.com/channel/UCk48...
Order Nicks books or even the entire "Workshop Companion" series on CD here:
https://amzn.to/3uaRNMI
Visit
http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at
http://www.tool-hunter.com/shopsmith-...
and http://shopsmith-tool-hunter.blogspot...
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!
#MyGrowthRings #StumpedQ&A #UrethaneBandsawTireReplacement
Re: Scott's My Growth Rings youtube channel & website
Posted: Fri Feb 19, 2021 2:08 pm
by thedovetailjoint
Hats off to @rdhelm who asked the simple question “When you used a brass wire wheel, was it really brass coated steel?” He went on to say that brass-plated steel wheels were all that he was able to find. Well, nowhere on the package does it say, but a quick magnet check proves that yes, it is most definitely a ferrous metal! I feel ripped off, but it did do the job just fine without damage to my bandsaw wheel.
- Not so brass wire wheel
- Not so brass wire brush.jpg (235.33 KiB) Viewed 1521 times
Installing Carter "Upgrade" Blade Guides on a Shopsmith Bandsaw. Are They Worth it?
Posted: Mon Feb 22, 2021 8:10 am
by Chad
- 64.jpg (8.2 KiB) Viewed 1465 times
Watch it here: https://www.youtube.com/watch?v=P-Uzrpp ... B&index=64
In this video we will install a set of Carter Products ball bearing blade guides on a Shopsmith bandsaw. According to their website "The Carter Shopsmith conversion kit updates your saws performance through the use of all sealed ball bearing roller guides. This provides your saw with reduced blade friction and improved cutting accuracy. The kit contains both upper and lower roller bearing side support assemblies, which work in conjunction with the existing Shopsmith thrust bearing." Really? Well, we'll be the judge of that, won't we?
Be sure to be a part of the follow-up mid-week video by posting a related Question, Comment, or Cheap-Shot in the comment field below the video.
This set was loaned to me for testing by Carter Products. This is just one of several upgrades that Carter Products has for your Shopsmith bandsaw and are available directly from them on their site:
https://tinyurl.com/CarterProductsSS (This is NOT an affiliate link)
Here are links to a few of the products I used in the video:
Boeshield T-9 lubricant spray:
https://amzn.to/37AYs9v
My favorite 9" long T-handle "Shopsmith Toolbox" 5/32" Hex Wrench:
https://amzn.to/3sm3NcJ
The best American-made rawhide mallet for Shopsmith owners:
https://amzn.to/3ukjeUu
Links to the videos mentioned in this video:
How to tune your Shospmith bandsaw:
https://youtu.be/zCBlSe4Z450
Here's the video where we removed the Shopsmith bandsaw table and so much more:
https://youtu.be/FyMKTS8yM5c
Visit
http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at
http://www.tool-hunter.com/shopsmith-...
and http://shopsmith-tool-hunter.blogspot...
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!
#CarterProducts #ShopsmithBandsawUpgrade #ShopsmithBandsawGuides
Re: Scott's My Growth Rings youtube channel & website
Posted: Mon Feb 22, 2021 8:23 am
by edma194
Just watched the Carter guide video, thanks for that. I have a set on order, and some blocks of wood already cut out for bandsaw boxes. Looks like installation will not be difficult.
Re: Scott's My Growth Rings youtube channel & website
Posted: Mon Feb 22, 2021 9:09 am
by thedovetailjoint
It really was easy, once I got the part rotated on the post. I was surprised that it continued to move though, so definitely consider using Loctite or something on that connection. Scott
Re: Scott's My Growth Rings youtube channel & website
Posted: Mon Feb 22, 2021 3:07 pm
by thedovetailjoint
Here's a screenshot of the Carter ball bearing blade guides installed on the Shopsmith bandsaw. Looking forward to doing some cutting this week once I get the table shimmed.
- Carter Products Shopsmith bandsaw ball bearing blade guides
- Carter Products Shopsmith bandsaw ball bearing blade guides MyGrowthRIngs.JPG (59.07 KiB) Viewed 1425 times
Re: Scott's My Growth Rings youtube channel & website
Posted: Wed Feb 24, 2021 10:09 am
by Ed in Tampa
Good show! Enjoyed the Carter upgrades! Also I found it interesting that many wire wheels sold as brass aren't. Thanks Scott!
STUMPED? Q&A: Using Carter Blade Guides on a Shopsmith Bandsaw
Posted: Thu Feb 25, 2021 7:15 am
by Chad
- 65.jpg (7.5 KiB) Viewed 1357 times
Watch it here: https://www.youtube.com/watch?v=Sf2jP2O ... =65&t=395s
In this video, we follow-up on the install a set of Carter Products ball-bearing blade guides on a Shopsmith bandsaw and answer your Questions, Comments & Cheap-Shots. If you missed that video, be sure to catch it here:
https://youtu.be/P-Uzrpp-nEQ
This set was loaned to me for testing by Carter Products. This is just one of several upgrades that Carter Products has for your Shopsmith bandsaw and are available directly from them on their site:
https://tinyurl.com/CarterProductsSS (This is NOT an affiliate link)
Visit
http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at
http://www.tool-hunter.com/shopsmith-...
and http://shopsmith-tool-hunter.blogspot...
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!
#CarterProducts #ShopsmithBandsawUpgrade #ShopsmithBandsawGuides
Re: Scott's My Growth Rings youtube channel & website
Posted: Thu Feb 25, 2021 11:12 am
by thedovetailjoint
IMPORANT NOTE: I believe that the excessive blade drift encountered in this video may have been a result of the “Stupid Bandsaw Trick” shown several videos back, where the blade on the Shopsmith bandsaw can be twisted. The amount of drift I encountered was unusual, and I’ve ordered a new blade and will test this phenomenon shortly. Scott (AKA: MyGrowthRings)