Page 22 of 41
Re: Scott's My Growth Rings youtube channel & website
Posted: Fri Apr 30, 2021 1:45 pm
by Chad
Re: Scott's My Growth Rings youtube channel & website
Posted: Mon May 03, 2021 11:02 am
by thedovetailjoint
bainin wrote: ↑Thu Apr 29, 2021 12:15 pm
On my fence, both the bracket and black hex nut are missing and there is only a hole which may be indicating that I might be missing some pieces
Were there different versions of the bandsaw fence ?
Why are you not using the bracket as shown in the image?
bsfence.JPG
b
I posted something about this on my blog some time back:
http://shopsmith-tool-hunter.blogspot.c ... sions.html
Introduction of the Shopsmith 6" Belt Sander SPT (Special Purpose Tool)
Posted: Tue May 04, 2021 7:09 am
by Chad
- 85.jpg (23.48 KiB) Viewed 4252 times
Watch it here: https://youtu.be/Tkd4tXRlGPs
The 6" Shopsmith Belt Saner has got to be the most requested Shopsmith SPT (Special Purpose Tool) that I've been asked to demo, and to be honest with you it deserved better than this rushed video. I promise that once we get settled in a new place that I'll reshoot this entire video.
Here's Nick Englers Belt Sander tune-up Sawdust Session:
https://youtu.be/91bRVOMEDFg
Here's the Sawdust Session with the Miter Gauge Belt Sander jig:
https://youtu.be/sbdM-bs8j-g
STUMPED? Q&A to Introduction of the Shopsmith 6" Belt Sander SPT (Special Purpose Tool)
Posted: Fri May 07, 2021 7:07 am
by Chad
- 86.jpg (25.6 KiB) Viewed 4196 times
Watch it here: https://youtu.be/xqhTFOA2HI4
This episode of STUMPED Q&A is a follow-up to the video Introduction of the Shopsmith 6" Belt Sander video and we not only answer the Questions, Comments, and Cheap-Shots from the video, but I share a few more tips that I should have done in the last video! Here's that video, in case you missed it:
https://youtu.be/Tkd4tXRlGPs
A 5000 Sub Celebration and Exploring Shopsmith Patents
Posted: Mon May 10, 2021 10:14 am
by Chad
- 87.jpg (24.69 KiB) Viewed 3950 times
My Growth Rings
Watch it here: https://youtu.be/hypHFbwDvMs
The bulk of this video is about exploring US patents, but DANG, 5000 subs! Just the other day I was reminded of the excellent celebration that took place back in 2015 when this channel hit 500 subs (Seen here:
https://youtu.be/cyKKosa0vmA) As much fun as that was I've decided that the 5000 of you deserve better, so we are going to conduct a drawing for a few on my favorite things later this week in our mid-week follow-up to this odd video.
STUMPED Q&A and 5000 Sub Drawing Delay
Posted: Fri May 14, 2021 7:06 am
by Chad
- 88.jpg (15.12 KiB) Viewed 3724 times
My Growth Rings
Watch it here: https://youtu.be/JrtiQOU2LE8
Due to my out-of-state travels this week there has been a delay in the recording and posting of this week's STUMPED Q&A follow-up video as well as the 5000 subscriber giveaway that I announced on Monday. If you missed that video, catch it here:
https://youtu.be/hypHFbwDvMs
Be sure to leave a comment to be entered in the giveaway.
A Few Of My Favorite Things: Google Patents Q&A and 5000 Sub Giveaway
Posted: Fri May 14, 2021 8:54 pm
by Chad
- 89.jpg (24.07 KiB) Viewed 3700 times
My Growth Rings
Watch it here: https://youtu.be/YlfPuM5ffH8
5000 subs! Now that's something to celebrate! In this video, we'll first cover the questions from the last video, which was on using Google to perform searches of US Patents, which as the patents for Shopsmith tools, and then we'll conduct a drawing for a few of my favorite shop tools and products that make my time in the shop easier and more enjoyable. Don't forget, if you are selected as a winner, email me with your name and shipping address to ScottMarkwood(at)Gmail.com
Thank you ALL for your support!
Introduction of the Shopsmith 20" Scroll Saw SPT (Special Purpose Tool)
Posted: Tue May 18, 2021 7:07 am
by Chad
- 90.jpg (24.59 KiB) Viewed 3519 times
My Growth Rings
Watch it here: https://youtu.be/7udRF1vHyC0
The Shopsmith Scroll Saw is another of the most requested Shopsmith SPT (Special Purpose Tool) that I've been asked to demo, and just like the 6" belt sander, I promise to shoot this video again once we get the shop relocated.
Here's a great video by Doug Reid putting the Shopsmith Scroll Saw through its paces:
https://youtu.be/omnamrobYxg
STUMPED? Q&A's from "Intro to the Shopsmith 20" Scroll Saw"
Posted: Thu May 20, 2021 3:27 pm
by Chad
- 91.jpg (24.58 KiB) Viewed 3348 times
My Growth Rings
Watch it here: https://youtu.be/0yEPPbu3JEo
THIS VIDEO IS NOT ABOUT CLAMPS!!! In this week's STUMPED? Q&A we answer the Questions, Comments, and Cheapshots from the "Introduction of the Shopsmith 20" Scroll Saw SPT" video. If you missed it, find it here:
https://youtu.be/7udRF1vHyC0
Here's a GREAT video by Doug Reid putting the Shopsmith Scroll Saw through its paces:
https://youtu.be/omnamrobYxg
What's Your "White Whale"? Is the Excalibur Ultra the BEST ADJUSTABLE DADO EVER???
Posted: Tue May 25, 2021 1:28 pm
by Chad
- 92.jpg (25.01 KiB) Viewed 3128 times
My Growth Rings
Watch it here: https://youtu.be/UHKbuu4rtjM
I have been waiting over 20 years to get my hands on an Excalibur Ultra dado blade, and now I'm admittedly totally confused by it! We'll put this to the test in the mid-week follow-up.