Mark VII Replace On/Off/On Toggle Switch
Moderators: HopefulSSer, admin
- JPG
- Platinum Member
- Posts: 34632
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Mark VII Replace On/Off/On Toggle Switch
Not very helpful to thee!
So those three terminals are essentially the 'operating strap' terminals of the switch.
I assume terminal 2 switches between terminals 1 and 3. 5 between 4 and 6, and 8 between 7 and 9.
I will attempt to get the GE wire colors matched to the switch terminals(assuming the above is correct). Just need an opportunity to look up the GE wiring diagram.
The 3 pole switch will only allow for switching one power lead for on/off.
Later!
So those three terminals are essentially the 'operating strap' terminals of the switch.
I assume terminal 2 switches between terminals 1 and 3. 5 between 4 and 6, and 8 between 7 and 9.
I will attempt to get the GE wire colors matched to the switch terminals(assuming the above is correct). Just need an opportunity to look up the GE wiring diagram.
The 3 pole switch will only allow for switching one power lead for on/off.
Later!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- JPG
- Platinum Member
- Posts: 34632
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Mark VII Replace On/Off/On Toggle Switch
Later has arrived.
I am assuming the carling switch terminals are 1,2,3 in a row, 4,5,6 in a second row and 7,8,9 in the last row.
That being correct, then
Power cord black to switch terminal 2
Power cord white to motor white
Motor blue to switch terminals 1 and 3
Motor red to switch terminal 5
Motor black to switch terminal 8
Motor orange to switch terminals 6 and 7
Motor violet to switch terminals 4 and 9
Hope this helps.
I am assuming the carling switch terminals are 1,2,3 in a row, 4,5,6 in a second row and 7,8,9 in the last row.
That being correct, then
Power cord black to switch terminal 2
Power cord white to motor white
Motor blue to switch terminals 1 and 3
Motor red to switch terminal 5
Motor black to switch terminal 8
Motor orange to switch terminals 6 and 7
Motor violet to switch terminals 4 and 9
Hope this helps.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Mark VII Replace On/Off/On Toggle Switch
Thanks for spending time on this. I'll let you know the outcome.
Re: Mark VII Replace On/Off/On Toggle Switch
I still think this Taiss universal switch may be a good option? I didn't end up trying it as I was able to repair my original switch. There is a 12 terminal option which I think would work.
https://www.amazon.com/Taiss-Universal- ... 217&sr=8-1
https://www.amazon.com/Taiss-Universal- ... 217&sr=8-1
ShopSmith Mark VII (406982), with Band Saw, Jig Saw, Belt Sander, and Jointer
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper