Page 1 of 1
Identify part
Posted: Sat Apr 10, 2021 2:40 pm
by goodyeartom
What is this? I purchased a used Shopsmith a while back and this was among the "extras."
- IMG_3796.JPG (134.49 KiB) Viewed 1334 times
- IMG_3797.JPG (116.51 KiB) Viewed 1334 times
Re: Identify part
Posted: Sat Apr 10, 2021 3:10 pm
by jsburger
It is a saw blade arbor for saw blades with a 5/8" arbor hole.
Re: Identify part
Posted: Sun Apr 11, 2021 1:01 pm
by chapmanruss
John is probably correct but since I cannot see the top of the Arbor without the nut I am not sure which one of the two shown below you have. The one on the left is P/N 555608 and is the 5/8" Saw Blade Arbor originally for the Sawsmith Table Saw but now for the Mark V 505, 510, 520 and Mark 7. It is the more commonly found Arbor of the two. The one on the right is P/N 555572 and is the 1-1/4" Saw Blade Arbor for the Sawsmith Table Saw.
_
- 555608 - 555572.jpg (195.03 KiB) Viewed 1280 times
Re: Identify part
Posted: Sun Apr 11, 2021 3:50 pm
by goodyeartom
Thank you!
It is a 555608 - and when I saw the answers I smacked my forehead and said "I should have seen that" to myself...!
Thanks again!
Tom