The white on the belt looks to be mold, and of course the belt is stiff as a board.
Refurbishing a MkV 510
Moderators: HopefulSSer, admin
Re: Refurbishing a MkV 510
Re: Refurbishing a MkV 510
Last one for today, lots of stuff going on in there..... what have I done....
Re: Refurbishing a MkV 510
Besides a lot of sawdust that needs to be cleaned out, all the parts look great to me. Wish my parts looked that good. That should clean up very well. The only thing missing from those photos is the motor. Looking forward to seeing how it has fared with all that sawdust build-up.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
- JPG
- Platinum Member
- Posts: 34645
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Refurbishing a MkV 510
You are DOING what NEEDS to be done!
Some of that mold rubbed of on to the sheave in the earlier pix.
Some of that mold rubbed of on to the sheave in the earlier pix.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Refurbishing a MkV 510
I've checked the bearings and they spin freely, no play and only a slight noise that you have to hold to your ear to hear. Question, can I immerse the drive sleeve in Evaporust with without harming the bearings?
Re: Refurbishing a MkV 510
Here's the motorMajones1 wrote: ↑Thu Sep 16, 2021 8:23 pm Besides a lot of sawdust that needs to be cleaned out, all the parts look great to me. Wish my parts looked that good. That should clean up very well. The only thing missing from those photos is the motor. Looking forward to seeing how it has fared with all that sawdust build-up.
Re: Refurbishing a MkV 510
Well, got the speed control cleaned up, but it was binding some, this looks to be the reason
- JPG
- Platinum Member
- Posts: 34645
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Refurbishing a MkV 510
No need to 'evapoprust' the drive sleeve. rotary wire brushing will suffice followed by JPW.
Quadrant gear is typical wear, get a new one, but that one IS salvageable.
Check the pivot for sloppy fit.
Bearings are not supposed to 'spin freely'. They should have internal grease that slows the spinning.
I suggest the Bill Mayo fix for the quadrant support arms. I think someone who knows where it is will provide a link.
P.S. BEWARE the motor shaft tension spring!!!!
Quadrant gear is typical wear, get a new one, but that one IS salvageable.
Check the pivot for sloppy fit.
Bearings are not supposed to 'spin freely'. They should have internal grease that slows the spinning.
I suggest the Bill Mayo fix for the quadrant support arms. I think someone who knows where it is will provide a link.
P.S. BEWARE the motor shaft tension spring!!!!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- JPG
- Platinum Member
- Posts: 34645
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Refurbishing a MkV 510
Dried out.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange