Page 9 of 16
Re: Refurbishing a MkV 510
Posted: Sun Sep 19, 2021 10:57 am
by John4337
Got the motor out and vacuumed off, here's a test run, thoughts?
https://youtu.be/UQYvWRhpCSk
Re: Refurbishing a MkV 510
Posted: Sun Sep 19, 2021 11:12 am
by JPG
Sounds like firm positive start switch actuator. Motor running sounds good.
Did you attempt to blow out the internals of the motor?
Re: Refurbishing a MkV 510
Posted: Sun Sep 19, 2021 11:36 am
by John4337
JPG wrote: āSun Sep 19, 2021 11:12 am
Sounds like firm positive start switch actuator. Motor running sounds good.
Did you attempt to blow out the internals of the motor?
I did, but there's a lot of sawdust still in there. I though it sounded good too. I didn't hear any bearing noise, I may get away with just taking it apart and cleaning it
Re: Refurbishing a MkV 510
Posted: Sun Sep 19, 2021 11:58 am
by JPG
Taking it apart and cleaning out the dust IS the next step.
Re: Refurbishing a MkV 510
Posted: Sun Sep 19, 2021 4:49 pm
by John4337
Re: Refurbishing a MkV 510
Posted: Sun Sep 19, 2021 8:47 pm
by John4337
Hi guys, Iām confused about the poly v belt bearings I need. The bearing document refers to p/n 501297, but mine have a different number. Am I just overthinking this somehow?
- 838215BC-D22F-43E6-9F19-9D4BF0F88E4C.jpeg (486.73 KiB) Viewed 1128 times
- D9E3019D-B05F-4171-9B23-37823E7E2EDE.jpeg (460.32 KiB) Viewed 1128 times
Re: Refurbishing a MkV 510
Posted: Sun Sep 19, 2021 8:54 pm
by jsburger
Different manufacturers have different numbers. Who made the bearings in your machine?
Re: Refurbishing a MkV 510
Posted: Sun Sep 19, 2021 8:59 pm
by John4337
jsburger wrote: āSun Sep 19, 2021 8:54 pm
Different manufacturers have different numbers. Who made the bearings in your machine?
No idea, I presume they are original equipment.
Re: Refurbishing a MkV 510
Posted: Sun Sep 19, 2021 10:01 pm
by JPG
Drive sleeve?
6205-2Z = 25 x 52 x15 mm double shielded
Replace with 25 x 52 x 15 2RS
Re: Refurbishing a MkV 510
Posted: Mon Sep 20, 2021 10:30 am
by John4337
JPG wrote: āSun Sep 19, 2021 10:01 pm
Drive sleeve?
6205-2Z = 25 x 52 x15 mm double shielded
Replace with 25 x 52 x 15 2RS
Thank you very much, got 'em on the way