Shopsmith Forums

Posted: **Sun Sep 19, 2021 10:57 am**

Got the motor out and vacuumed off, here's a test run, thoughts?

https://youtu.be/UQYvWRhpCSk

Posted: **Sun Sep 19, 2021 11:12 am**

Sounds like firm positive start switch actuator. Motor running sounds good.

Did you attempt to blow out the internals of the motor?

Posted: **Sun Sep 19, 2021 11:36 am**

JPG wrote: ↑Sun Sep 19, 2021 11:12 am Sounds like firm positive start switch actuator. Motor running sounds good.

Did you attempt to blow out the internals of the motor?

I did, but there's a lot of sawdust still in there. I though it sounded good too. I didn't hear any bearing noise, I may get away with just taking it apart and cleaning it

Posted: **Sun Sep 19, 2021 11:58 am**

Taking it apart and cleaning out the dust IS the next step.

Posted: **Sun Sep 19, 2021 4:49 pm**

Well, apart, cleaned and back together in the same day. To my astonishment, it works....

: motor 7.jpg (308.19 KiB) Viewed 1107 times

: motor 8.jpg (316.69 KiB) Viewed 1107 times

: motor 9.jpg (346.23 KiB) Viewed 1107 times

: motor 91.jpg (351.11 KiB) Viewed 1107 times

: motor 92.jpg (298.57 KiB) Viewed 1107 times

Posted: **Sun Sep 19, 2021 8:47 pm**

Hi guys, I’m confused about the poly v belt bearings I need. The bearing document refers to p/n 501297, but mine have a different number. Am I just overthinking this somehow?

: 838215BC-D22F-43E6-9F19-9D4BF0F88E4C.jpeg (486.73 KiB) Viewed 1095 times

: D9E3019D-B05F-4171-9B23-37823E7E2EDE.jpeg (460.32 KiB) Viewed 1095 times

Posted: **Sun Sep 19, 2021 8:54 pm**

Different manufacturers have different numbers. Who made the bearings in your machine?

Posted: **Sun Sep 19, 2021 8:59 pm**

jsburger wrote: ↑Sun Sep 19, 2021 8:54 pm Different manufacturers have different numbers. Who made the bearings in your machine?

No idea, I presume they are original equipment.

Posted: **Sun Sep 19, 2021 10:01 pm**

Drive sleeve?

6205-2Z = 25 x 52 x15 mm double shielded

Replace with 25 x 52 x 15 2RS

Posted: **Mon Sep 20, 2021 10:30 am**

JPG wrote: ↑Sun Sep 19, 2021 10:01 pm Drive sleeve?

6205-2Z = 25 x 52 x15 mm double shielded

Replace with 25 x 52 x 15 2RS

Thank you very much, got 'em on the way

Shopsmith Forums

Refurbishing a MkV 510

Re: Refurbishing a MkV 510

Re: Refurbishing a MkV 510

Re: Refurbishing a MkV 510

Re: Refurbishing a MkV 510

Re: Refurbishing a MkV 510

Re: Refurbishing a MkV 510

Re: Refurbishing a MkV 510

Re: Refurbishing a MkV 510

Re: Refurbishing a MkV 510

Re: Refurbishing a MkV 510