Page 1 of 1
My first box joint project.
Posted: Sun Sep 12, 2021 11:48 am
by stickmaker
This was my first box joint boxs. I am mostly a wood carver . I have made a few boxes but had never done box joints. My first trys did not go well. I was using a jig on the miter gage. I finally made a sled and it all worked. Thankful for YouTube. It is poplar and pine.
- IMG_2176 (3).jpg (121.75 KiB) Viewed 1797 times
Re: My first box joint project.
Posted: Sun Sep 12, 2021 12:08 pm
by Majones1
Very nice. That’s still something I want to learn how to do.
Re: My first box joint project.
Posted: Sun Sep 12, 2021 12:29 pm
by JPG
For a first attempt, you done real gud!!!
Now about that slot in the top?
Re: My first box joint project.
Posted: Sun Sep 12, 2021 12:43 pm
by garys
Nice work.
I've made a lot of small boxes using the box joint like that. I use my miter gauge and a jig I made to do it. It works well. I also use the jig and the box joint for drawers because it makes for nice strong drawers.
Re: My first box joint project.
Posted: Sun Sep 12, 2021 12:56 pm
by algale
Excellent work!
Re: My first box joint project.
Posted: Mon Sep 13, 2021 12:51 am
by edflorence
Nice! Those are some sweet corners!
Re: My first box joint project.
Posted: Mon Sep 13, 2021 2:54 pm
by edma194
Very nice work! Really solid looking box.
Re: My first box joint project.
Posted: Mon Sep 13, 2021 8:43 pm
by redleg
Good on ya. My guess is the slot is for mad money?
Re: My first box joint project.
Posted: Thu Sep 16, 2021 10:06 am
by edma194
Are you making an heirloom spot welder? (I don't know why but you'll have to jump up to 12:45 to see the finished box)
Re: My first box joint project.
Posted: Sat Sep 18, 2021 11:46 pm
by Hobbyman2
Nice job