Page 3 of 3
Re: SS Mark 7, Lathe and Routing
Posted: Sat Oct 09, 2021 11:54 am
by chapmanruss
Very nice indeed. I am sure the seller is happy it is going to someone who will care for it and get some great use out of it.
Here are the two upside down picture reoriented.
_
- Troy Jones M7-2.jpg (403.43 KiB) Viewed 3303 times
- Troy Jones M7-3.jpg (260.81 KiB) Viewed 3303 times
Re: SS Mark 7, Lathe and Routing
Posted: Sat Oct 09, 2021 12:03 pm
by Majones1
I’d be envious if I wasn’t so happy for you. Looks like you’ll have a lot of fun with that!
Re: SS Mark 7, Lathe and Routing
Posted: Sat Oct 09, 2021 9:32 pm
by tkjones63
thank you for the pic flip, i need to figure that out someday
Re: SS Mark 7, Lathe and Routing
Posted: Sat Oct 09, 2021 10:00 pm
by JPG
Download irfanview a free editor.
Re: SS Mark 7, Lathe and Routing
Posted: Wed Oct 13, 2021 11:31 am
by bainin
dang that thing is clean. congrats !
b
Re: SS Mark 7, Lathe and Routing
Posted: Sat Oct 30, 2021 11:28 am
by wa2crk
Yes, pens can be done on a Shopsmith. And other small things also. If you buy a chuck you will have to get a SS adaptor for the chuck.
- DSC00912.JPG (216.91 KiB) Viewed 3079 times
- trifecta.JPG (342.32 KiB) Viewed 3079 times
Bill V
Re: SS Mark 7, Lathe and Routing
Posted: Tue Nov 02, 2021 1:59 pm
by tkjones63
wa2crk wrote: ↑Sat Oct 30, 2021 11:28 am
Yes, pens can be done on a Shopsmith. And other small things also. If you buy a chuck you will have to get a SS adaptor for the chuck.DSC00912.JPGtrifecta.JPG
Bill V
Bill: some very nice work sir, i hope with alot of practice i can do close to that quality
has anyone used or own the SS Nova penset kit ?? kinda thought this might be a decent way to get started in this area
https://www.shopsmith.com/ownersite/cat ... urning.htm
Re: SS Mark 7, Lathe and Routing
Posted: Wed Nov 03, 2021 6:51 pm
by wa2crk
Troy
I prefer the Oneway Talon chuck. I got a Nova G3 as a second chuck but I did not like it. Don't take just my opinion though. The Nova had a left hand thread for tightening and loosening the jaws. A bit confusing when using two chucks. I sold the Nova and bought a second Oneway. Whichever one you buy you will be happy with it. I understand that Nova may have corrected the left handed thread issue but check first. If you do buy a second chuck eventually I recommend that you buy the same brand. The chuck jaws are not compatible across brands.
Bill V