Page 1 of 1
Legends of Shopsmith interviewed
Posted: Wed Nov 10, 2021 7:45 am
by thedovetailjoint
Chad Nevels has done an excellent job curating links to my channel in a thread titled "My Growth Rings" with Scott Markwood, but in case you missed it, I've had the pleasure of interviewing several well-known Shopsmith personalities on my channel. So you don't miss them I'm adding them here under their own heading. Scott
Shopsmith legend Doug Reid on all things Shopsmith
Posted: Wed Nov 10, 2021 7:48 am
by thedovetailjoint
Doug Reid has sold Shopsmith tools to THOUSANDS of woodworkers across the USA, and his Youtube channel has garnered over 1 1/2 Millon views! Join me as I chat and catch up with Doug and be sure to visit and subscribe to Doug's channel.
Watch the interview here:
https://youtu.be/-pFWmXpoBuI
- Doug Reid.jpeg (132.33 KiB) Viewed 2821 times
Re: Legends of Shopsmith interviewed
Posted: Wed Nov 10, 2021 7:50 am
by thedovetailjoint
When Doug Reid and I met to record this past weekend's video we chatted for an hour and a half, so some fun parts of the conversation wound up on the cutting room floor. This outtake was one of my favorites, so here it is after all!
Watch it here:
https://youtu.be/_hJOhmqduvA
- Doug Reid cut for time.jpeg (155.08 KiB) Viewed 2821 times
Nick Engler from "Workshop Companion" talks Shopsmith, woodworking education & more
Posted: Wed Nov 10, 2021 7:52 am
by thedovetailjoint
Popular author and educator Nick Engler reminisces about his years at power tool manufacturer Shopsmith and brings us up to speed on the launch of his "Workshop Companion" Youtube channel and more.
Watch it here:
https://youtu.be/-UA5ZIFJCfA
- Nick Engler.jpeg (132.23 KiB) Viewed 2821 times
Your DAD bought HIS Shopsmith woodworking tools from Mike Young! Let's chat with Mike!
Posted: Wed Nov 10, 2021 7:54 am
by thedovetailjoint
While Mike Young's Youtube channel is new, videos of him demonstrating and using Shopsmith tools have been on Youtube since its inception! Mike has been demoing and selling for Shopsmith for over 35 years and has even contributed to the design of a short-lived but popular tool; the Crafter's Station. Join me as we reminisce about woodworking, woodworkers and learn what's next for Mike.
Watch the interview here:
https://youtu.be/3BfkdOpuk6E
- Mike Young thumb.jpeg (125.56 KiB) Viewed 2820 times
Re: Legends of Shopsmith interviewed
Posted: Wed Nov 10, 2021 10:07 am
by Chad
Scott, any plans of interviewing Jim McCann?
Or perhaps Scott Phillips?
Although Scott P. may or may not be a Shopsmith legend; he is a legendary woodworker non the less in my mind.
Re: Legends of Shopsmith interviewed
Posted: Wed Nov 10, 2021 12:45 pm
by thedovetailjoint
Iām certainly open to it and have just sent them both an invitation. Scott
Chad wrote: āWed Nov 10, 2021 10:07 am
Scott, any plans of interviewing Jim McCann?
Or perhaps Scott Phillips?
Although Scott P. may or may not be a Shopsmith legend; he is a legendary woodworker non the less in my mind.
Re: Legends of Shopsmith interviewed
Posted: Fri Dec 03, 2021 3:58 pm
by thedovetailjoint
- Jim McCann Youtube Thumb part 1 Large.001.jpeg (315.57 KiB) Viewed 2118 times
Chad, I know that you know that your wish was granted, but just in case someone else doesn't know, I did interview Jim McCann and have been posting that conversation in several parts. Here's part one:
https://youtu.be/mXMhBdZtaQo
- JIM-BOB PART 2.001.jpeg (344.92 KiB) Viewed 2118 times
And here's part two:
https://youtu.be/51jRiMJXi-A
Why so few Shopsmith tools in YOUR shop, Jim McCann?
Posted: Sun Dec 05, 2021 8:03 pm
by Chad
- 138.jpg (24.34 KiB) Viewed 1976 times
Legends of Shopsmith interviewed
Watch it here: https://youtu.be/7GuQMjgt3rk
We wrap up our conversation with Shopsmith power tool company engineer, Jim McCann, and we start off with a comment that I heard from several people who saw the tour of Jim's shop on the Workshop Companion channel. From there we talk about tools that Jim wishes could have made it to market and a few final thoughts. Thanks for joining us in this conversation.
If you enjoyed this, here are a few videos you might also enjoy
Here's Part One of my chat with Jim:
https://youtu.be/mXMhBdZtaQo
Here's Part Two of my chat with Jim:
https://youtu.be/51jRiMJXi-A
Here's Jim's shop tour with Nick Engler:
https://youtu.be/O8-fU850MZg