I think I will stick with my Mark 7
Moderators: HopefulSSer, admin
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
I think I will stick with my Mark 7
So here is an interesting Mark V for sale on ebay. He calls it a "Dual Shopsmith Mark V 510 or Shop-Franken-Smith". Basically, it is two Mark V 510 Headstocks and Carriages mounted on shortened way tubes at 46" that can be raised on either end of the tool. Kinda what a Mark 7 or Mark V with double tilt can do except with two headstocks and carriages it can be setup for two functions at once. I'll let you be the judge.
_ .
I am not sure what the function of the board is. Maybe workspace to keep items handy. Having one end always up limits the table saw capacity and the shortened way tubes limits the lathe length.
I will stick with my Mark 7 and if I need additional set ups at the same time, I still have the Mark V 520 and Model 10's to use. Two tools are better than one Shop-Franken-Smith.
_ .
I am not sure what the function of the board is. Maybe workspace to keep items handy. Having one end always up limits the table saw capacity and the shortened way tubes limits the lathe length.
I will stick with my Mark 7 and if I need additional set ups at the same time, I still have the Mark V 520 and Model 10's to use. Two tools are better than one Shop-Franken-Smith.
Last edited by chapmanruss on Tue May 31, 2022 10:46 am, edited 1 time in total.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: I think I will stick with my Mark 7
This is just one of those types of things I've always loved about Shopsmiths and this Forum !!!
Re: I think I will stick with my Mark 7
That is way cool. I have imagined all sorts of configurations of Shopsmith bench, table, and headstock configurations, but nothing really worth considering any further in the end, save for a drill press and a shorty. This one is interesting if you want a drill press available all the time, it resembles some of the Smithy type milling machines. I have a separate dedicated Shopsmith drill press already so it doesn't give me anything new. Someone might like this as way to save space. However the drill press tubes on the end could get in the way of working on large stock.
I enjoyed making my drill press. It's like using Shopsmith parts in the manner of TinkerToys. I'll eventually end up making some kind of FrankenSmith because I have a lot of parts. I already made a FrankenSawSmith.
I enjoyed making my drill press. It's like using Shopsmith parts in the manner of TinkerToys. I'll eventually end up making some kind of FrankenSmith because I have a lot of parts. I already made a FrankenSawSmith.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Re: I think I will stick with my Mark 7
I think you guys must have enjoyed playing with erector sets a little too much as a kid...
Whenever I see one of these, I always ask why?!?!? Sure you can make all kinds of crazy contraptions putting together multiple Mark V's, but are you any more efficient? Does it solve a problem that you have? I am still struggling with the "why" here. Keep in mind the whole claim to fame for Shopsmith is the supposed quick change over between modes, so what benefit does one of these Frankensmith machines have?
Whenever I see one of these, I always ask why?!?!? Sure you can make all kinds of crazy contraptions putting together multiple Mark V's, but are you any more efficient? Does it solve a problem that you have? I am still struggling with the "why" here. Keep in mind the whole claim to fame for Shopsmith is the supposed quick change over between modes, so what benefit does one of these Frankensmith machines have?
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: I think I will stick with my Mark 7
Why? Because we can and it's cool. Besides, if it doesn't meet our expectations we can take it apart and make something else cool. Long live Erector Sets!
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: I think I will stick with my Mark 7
Seems like more of an abomination to me; hence the "Frankensmith" moniker. Must be an acquired taste...
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: I think I will stick with my Mark 7
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: I think I will stick with my Mark 7
I wonder if the left(under table tilt) runs backwards?
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- BuckeyeDennis
- Platinum Member
- Posts: 3697
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: I think I will stick with my Mark 7
WHAT is a reversible shaper cutter???BuckeyeDennis wrote: ↑Sat Apr 23, 2022 7:38 amMy right-handed router bits greatly outnumber my reversable shaper cutters.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange