Just bought a Shopsmith Mark V
Moderators: HopefulSSer, admin
Re: Just bought a Shopsmith Mark V
That item you circled, I badly referred to it above at the drive link to the Jointer however, not sure its true but I know the item you circled was a very old style link that was known to fail, often they dried out. This one is in very good shape, still pliable. I understood the nylon replacement should be the target and that kit is like 44 bucks.
The jointer was on the shop smith when I picked it up and seemed to have all the mounting it needed. I am not sure how to drive it. Its turns free but seems dry so once cleaned up, I should be able to check better. The documents are crazy, I have a couple issues of Shavers that Nick Engler ended before he started the Hands On, which I have a few copies of that, among several color catalogs for the greene and goldie.
The jointer was on the shop smith when I picked it up and seemed to have all the mounting it needed. I am not sure how to drive it. Its turns free but seems dry so once cleaned up, I should be able to check better. The documents are crazy, I have a couple issues of Shavers that Nick Engler ended before he started the Hands On, which I have a few copies of that, among several color catalogs for the greene and goldie.
1955 Mark 5 Greene "A"
Needs Un-Gilmer'd and some love.
Needs Un-Gilmer'd and some love.
Re: Just bought a Shopsmith Mark V
I also noticed my disc sanding plate is not conical like others that I have heard mentioned on videos.
1955 Mark 5 Greene "A"
Needs Un-Gilmer'd and some love.
Needs Un-Gilmer'd and some love.
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Just bought a Shopsmith Mark V
There are three types of 12"sanding discs.
The early aluminum ones which were on the M10 and the Mark 5. (there are two versions of it)
Later (SS Inc)created the flat steel ones. There are two versions of the hub to accommodate the M5, MV 500
and the later 510 and mark 7.
The conical version was introduced later and also has two versions(short/long hub)
Another version was the 10" MVII version which is flat on one side and conical on the back side.
The early aluminum ones which were on the M10 and the Mark 5. (there are two versions of it)
Later (SS Inc)created the flat steel ones. There are two versions of the hub to accommodate the M5, MV 500
and the later 510 and mark 7.
The conical version was introduced later and also has two versions(short/long hub)
Another version was the 10" MVII version which is flat on one side and conical on the back side.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Just bought a Shopsmith Mark V
I am not sure the advantage/disadvantage of either. Seems the conical was a little more of a struggle to get the paper on it.
Any thoughts on the 3 and 3/4 lathe plate to do bowls and such. I would also like to get a lathe chuck one day too.
Any thoughts on the 3 and 3/4 lathe plate to do bowls and such. I would also like to get a lathe chuck one day too.
1955 Mark 5 Greene "A"
Needs Un-Gilmer'd and some love.
Needs Un-Gilmer'd and some love.
Re: Just bought a Shopsmith Mark V
Hmmm, I didn't know we had a Model 1007.JPG wrote: ↑Tue Jun 28, 2022 6:28 pm There are three types of 12"sanding discs.
The early aluminum ones which were on the M10 and the Mark 5. (there are two versions of it)
Later (SS Inc)created the flat steel ones. There are two versions of the hub to accommodate the M5, MV 500
and the later 510 and mark 7.
The conical version was introduced later and also has two versions(short/long hub)
Another version was the 10" MVII version which is flat on one side and conical on the back side.
![Roll Eyes (Sarcastic) :rolleyes:](./images/smilies/rolleyes.gif)
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Just bought a Shopsmith Mark V
jsburger wrote: ↑Tue Jun 28, 2022 6:48 pmHmmm, I didn't know we had a Model 1007.JPG wrote: ↑Tue Jun 28, 2022 6:28 pm There are three types of 12"sanding discs.
The early aluminum ones which were on the M10 and the Mark 5. (there are two versions of it)
Later (SS Inc)created the flat steel ones. There are two versions of the hub to accommodate the M5, MV 500
and the later 510 and mark 7.
The conical version was introduced later and also has two versions(short/long hub)
Another version was the 10" MVII version which is flat on one side and conical on the back side.![]()
1007???
The flat and conical disks are used for different purposes.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Just bought a Shopsmith Mark V
Roman numeral MVII is 1007 Arabic.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: Just bought a Shopsmith Mark V
Thanks for sorting that out, I thought I lost my mind figuring out what that meant.
![Roll Eyes (Sarcastic) :rolleyes:](./images/smilies/rolleyes.gif)
1955 Mark 5 Greene "A"
Needs Un-Gilmer'd and some love.
Needs Un-Gilmer'd and some love.
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Just bought a Shopsmith Mark V
John is having a little fun with JPG.
MKII vs 1007
JPG gave you the short version and good information for the Sanding Disk. I can expand a bit on that if you are interested.
The Jointer mounts to the Mark 5 on the left side of the Headstock but unlike most other SPT's it is powered by the lower "high speed" shaft as shown below. Getting the Hubs and Power Coupler will allow you to power the Jointer. If it were myself, I would put the early coupler aside as a piece of Shopsmith history, in fact I have two that are put aside. Preserve those old documents too.
_
![Big Grin :D](./images/smilies/biggrin.gif)
JPG gave you the short version and good information for the Sanding Disk. I can expand a bit on that if you are interested.
The Jointer mounts to the Mark 5 on the left side of the Headstock but unlike most other SPT's it is powered by the lower "high speed" shaft as shown below. Getting the Hubs and Power Coupler will allow you to power the Jointer. If it were myself, I would put the early coupler aside as a piece of Shopsmith history, in fact I have two that are put aside. Preserve those old documents too.
_
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Just bought a Shopsmith Mark V
Cheers Russ,chapmanruss wrote: ↑Wed Jun 29, 2022 12:49 pm John is having a little fun with JPG.MKII vs 1007
JPG gave you the short version and good information for the Sanding Disk. I can expand a bit on that if you are interested.
The Jointer mounts to the Mark 5 on the left side of the Headstock but unlike most other SPT's it is powered by the lower "high speed" shaft as shown below. Getting the Hubs and Power Coupler will allow you to power the Jointer. If it were myself, I would put the early coupler aside as a piece of Shopsmith history, in fact I have two that are put aside. Preserve those old documents too.
Jointer Bevel Cut.jpg
I thought it was hooked up as you have shown it, but trying to to assume / get killed by doing it wrong.
![Big Grin :D](./images/smilies/biggrin.gif)
I have pulled my Quill from its holder (sounds personal) and determined I have in fact a update one with 2 twin bearings, happy about that. It is clean but dry, in need of Wax.
I have watched many video's that show pulling the end cover to do oil and cleaning around the shafts and every one I have seen had 2 Philips screw. Oh not mine, it has 9.
![Embarrassment :o](./images/smilies/redface.gif)
1955 Mark 5 Greene "A"
Needs Un-Gilmer'd and some love.
Needs Un-Gilmer'd and some love.