Just Finished My First Shopsmith Project
Moderators: HopefulSSer, admin
Re: Just Finished My First Shopsmith Project
Thanks, Russ! I got the construction idea from an old 1950s hi-fi cabinet I bought at a thrift shop back in the 1980s. I also built a nightstand that way back in the '90s. We still use the nightstand as well. It's sturdy too. The nightstand and end table could probably double as jack stands when I work on my car. ;-)
1982 Mk V upgraded to a 510.
Gray SS scroll saw, SS Jointer, SS bandsaw
Inherited WWII vintage Atlas/Craftsman drill press
Gray SS scroll saw, SS Jointer, SS bandsaw
Inherited WWII vintage Atlas/Craftsman drill press
Re: Just Finished My First Shopsmith Project
Very Nice!!
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: Just Finished My First Shopsmith Project
That's a very nice piece of furniture. You should give yourself a pat on the back.
Re: Just Finished My First Shopsmith Project
Thanks again for the kind words!
My Shopsmith seems to have developed a slight scraping noise related to the fan sheave. Looking at some posts in the maintenance section of the forum, I think it might be time for some disassembly and maybe adding a thin washer behind the sheave.
Then on to the next project . . .
My Shopsmith seems to have developed a slight scraping noise related to the fan sheave. Looking at some posts in the maintenance section of the forum, I think it might be time for some disassembly and maybe adding a thin washer behind the sheave.
Then on to the next project . . .
1982 Mk V upgraded to a 510.
Gray SS scroll saw, SS Jointer, SS bandsaw
Inherited WWII vintage Atlas/Craftsman drill press
Gray SS scroll saw, SS Jointer, SS bandsaw
Inherited WWII vintage Atlas/Craftsman drill press
- chapmanruss
- Platinum Member
- Posts: 3480
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Just Finished My First Shopsmith Project
BigAl,
There have been posts about that problem which is usually the fixed fan/sheeve on the motor shaft loosening enough to slip back against the motor housing. Sorry I don't have a link for you.
There have been posts about that problem which is usually the fixed fan/sheeve on the motor shaft loosening enough to slip back against the motor housing. Sorry I don't have a link for you.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Just Finished My First Shopsmith Project
First time poster. This is a direct partial re-post from the original poster BigAl. Reported as SPAM.QWERTYUIOP wrote: ↑Fri Sep 23, 2022 8:52 am Gratitude for the caring answers! I think it ended up good overall. The top is somewhat not the same as I anticipated. I wanted to simply adjust the top and base edges a little yet the switch bit sneaked through the collet and cut pretty profound. I have 40 year old switch with a to some degree corroded collet nut. When I tidied up the collet, I just proceeded the more profound cut. It looks okay like that yet I may ultimately make another top for it. The stain looks sort of smudged in the photograph yet better face to face. i am new user in this forums. Please help me!
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- dusty
- Platinum Member
- Posts: 21368
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Just Finished My First Shopsmith Project
From an IP in Multan, Pakistan.jsburger wrote: ↑Fri Sep 23, 2022 5:12 pmFirst time poster. This is a direct partial re-post from the original poster BigAl. Reported as SPAM.QWERTYUIOP wrote: ↑Fri Sep 23, 2022 8:52 am Gratitude for the caring answers! I think it ended up good overall. The top is somewhat not the same as I anticipated. I wanted to simply adjust the top and base edges a little yet the switch bit sneaked through the collet and cut pretty profound. I have 40 year old switch with a to some degree corroded collet nut. When I tidied up the collet, I just proceeded the more profound cut. It looks okay like that yet I may ultimately make another top for it. The stain looks sort of smudged in the photograph yet better face to face. i am new user in this forums. Please help me!
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
Re: Just Finished My First Shopsmith Project
jsburger wrote: ↑Fri Sep 23, 2022 5:12 pmFirst time poster. This is a direct partial re-post from the original poster BigAl. Reported as SPAM.QWERTYUIOP wrote: ↑Fri Sep 23, 2022 8:52 am Gratitude for the caring answers! I think it ended up good overall. The top is somewhat not the same as I anticipated. I wanted to simply adjust the top and base edges a little yet the switch bit sneaked through the collet and cut pretty profound. I have 40 year old switch with a to some degree corroded collet nut. When I tidied up the collet, I just proceeded the more profound cut. It looks okay like that yet I may ultimately make another top for it. The stain looks sort of smudged in the photograph yet better face to face. i am new user in this forums. Please help me!
Wow, the text above was certainly not from me. It looks like someone sent one of my posts through a translation program and back again. Pakistan is certainly a long way from where I am. Yep, it's time to change my password.
1982 Mk V upgraded to a 510.
Gray SS scroll saw, SS Jointer, SS bandsaw
Inherited WWII vintage Atlas/Craftsman drill press
Gray SS scroll saw, SS Jointer, SS bandsaw
Inherited WWII vintage Atlas/Craftsman drill press
- JPG
- Platinum Member
- Posts: 34632
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Just Finished My First Shopsmith Project
Change password ?????
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange