Mark VII a start and a long ways to go..
Moderators: HopefulSSer, admin
Re: Mark VII a start and a long ways to go..
Casters, final answer. Comments good, bad or indifferent always welcomed and appreciated.
- Attachments
-
- F72C1748-8A71-4EB2-9105-B53FA57A8CAB.jpeg (447.78 KiB) Viewed 1254 times
-
- 55CCB12F-0E5A-4E3B-9E90-0BBFE23E35E6.jpeg (584.09 KiB) Viewed 1254 times
I may be old but I’m slow
https://www.schmuckatellico.com/
https://scshiftknob.com
https://www.schmuckatellico.com/
https://scshiftknob.com
Re: Mark VII a start and a long ways to go..
Hi Mike, you already know my position, I would try to make the wheels fit rather than modify the frame, but with that said, I think your approach will work. Just be sure that when the wheel is in its lowest position it can completely spin around 360 degrees without hitting the inside of the shoe or else cutting will be for nothing. You never know what position/direction the wheel will be in when you lower the machine and you dont want it to bind or get jammed up and not lower completely.
Mike
Mike
ShopSmith Mark VII (406982), with Band Saw, Jig Saw, Belt Sander, and Jointer
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper
Re: Mark VII a start and a long ways to go..
I appreciate all your input Mike and it has made me think this through more than a few times. I’m still not 100% and of course I have measured twice many times. The only issues are the lips on each side and the front of shoe. I want to make the shoe fit the casters not the casters fit the shoe. This way in the future it’s an easy fix to just replace the casters. Still thinking about it so cleaning parts for now, have plenty to do.:-) thanks again
I may be old but I’m slow
https://www.schmuckatellico.com/
https://scshiftknob.com
https://www.schmuckatellico.com/
https://scshiftknob.com
Re: Mark VII a start and a long ways to go..
Just an update with some pics- shoe modification complete, it goes up and down (still need to install final resting feet) She goes up and down and rolls all around very smoothly and better than the other (4) SS I have.
Have some mock-ups for butcher block inside vacuum box and at each end. Will also have pieces under brackets that rod trunnion. This will help my back down the road. I end up pushing the centerline of the seat for the rod trunnion over towards outside about 1/16” each end. I’m not sure if there is enough play to accomplish what I want to do but thought I would put it out there for comment.
Thanks
Have some mock-ups for butcher block inside vacuum box and at each end. Will also have pieces under brackets that rod trunnion. This will help my back down the road. I end up pushing the centerline of the seat for the rod trunnion over towards outside about 1/16” each end. I’m not sure if there is enough play to accomplish what I want to do but thought I would put it out there for comment.
Thanks
- Attachments
-
- Wheel mods completed
- F68908EB-5756-4BAF-B6A1-D804754502DE.jpeg (489.91 KiB) Viewed 1175 times
-
- Rolls like a dream
- A8B240E5-6CF2-4342-AAB6-08DBC912771A.jpeg (757.84 KiB) Viewed 1175 times
-
- New butcher block mods
- B8C82828-A175-4E6E-B3D1-844FC1737485.jpeg (650.59 KiB) Viewed 1175 times
-
- Possible issue
- 5F68AEF7-28A2-4319-9F99-91AF8C83A61A.jpeg (359.9 KiB) Viewed 1175 times
I may be old but I’m slow
https://www.schmuckatellico.com/
https://scshiftknob.com
https://www.schmuckatellico.com/
https://scshiftknob.com
Re: Mark VII a start and a long ways to go..
Nice work Mike, steady progress. FYI, if you just slightly bevel the top of the board under the brackets to have slight inward slope it will rotate the bracket and pull the center of the bracket holes in the 1/16" you're looking for. You actually may be able to achieve this by adjusting how tight the bolt is and slightly deforming/compressing the wood under the bracket.
Mike -
Mike -
ShopSmith Mark VII (406982), with Band Saw, Jig Saw, Belt Sander, and Jointer
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Mark VII a start and a long ways to go..
To say nothing about the sheet metal flexing.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Mark VII a start and a long ways to go..
Thanks Mike and JPG, I’ll do a 2 sided mock-up 2 verify how much play if any. Nothing set in stone but I like the concept. The Mark VII has so much storage potential and the overall design, other than the vacuum, is spectacular. Starting to really like this machine.
I may be old but I’m slow
https://www.schmuckatellico.com/
https://scshiftknob.com
https://www.schmuckatellico.com/
https://scshiftknob.com
Re: Mark VII a start and a long ways to go..
Very timely thread for me
Very nice restoration so far
I recently acquired a mkvii (60’s version) in about the same condition as yours
Price was right ($0) and I figured it would be a “parts” machine for my other ‘67 mkvii
Came with 2 extra switches but nothing was working when I got it
After a few days of messing around the motor started running after I bypassed the switch with jumper’s
The “extra” switches show signs of trying to be taken apart
The one that is currently connected to the motor also has problems
Both the bases on these machines (around the caster area) look different from the pictures you have posted
Anyway, long story short, I can maybe help out with some parts. I’m not too far. I live in Santa Maria, Ca
Very nice restoration so far
I recently acquired a mkvii (60’s version) in about the same condition as yours
Price was right ($0) and I figured it would be a “parts” machine for my other ‘67 mkvii
Came with 2 extra switches but nothing was working when I got it
After a few days of messing around the motor started running after I bypassed the switch with jumper’s
The “extra” switches show signs of trying to be taken apart
The one that is currently connected to the motor also has problems
Both the bases on these machines (around the caster area) look different from the pictures you have posted
Anyway, long story short, I can maybe help out with some parts. I’m not too far. I live in Santa Maria, Ca
BigK
1967 MK VII with Band Saw, 6 x 48 Belt Sander, Jointer and many small accessories
Ridgid Contractors Saw
Delta 9” RAS
2 DeWalt MBF RAS’s
14” Delta Drill Press
1967 MK VII with Band Saw, 6 x 48 Belt Sander, Jointer and many small accessories
Ridgid Contractors Saw
Delta 9” RAS
2 DeWalt MBF RAS’s
14” Delta Drill Press
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Mark VII a start and a long ways to go..
Some M VII have a one piece foot on each end.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Mark VII a start and a long ways to go..
Hi Bigk01- I was in Santa Maria today at the south Vallarta market and looking at cars. Not sure what parts you have but would be interested in some I’m sure. I’ll send you a PM
I may be old but I’m slow
https://www.schmuckatellico.com/
https://scshiftknob.com
https://www.schmuckatellico.com/
https://scshiftknob.com