Shopsmith Forums

anyone able to help dose thw power coupler go on the top auxilary power shaft or the bottom one that says planer and jointer only very confused on the shaft it needs to be hooked up too manual is not very helpful:eek:

thanks thad

well lets see now thad i dont own a shopsmith scroll saw but if the lower shaft says planer and jointer only i would guess that it would go to the top shaft

Hi,

Some times a picture is worth a 1000 words but in this case you might want to just look at this chapter in the online PTWFE which can be found at:
http://www.shopsmith.com/academy/scrollsaw/index.htm#setup

Figure 15-1 (You can click it to enlarge it)

(In case you just want the simple answer it mounts to the lower output).

Ed

reible wrote:Hi,

Some times a picture is worth a 1000 words but in this case you might want to just look at this chapter in the online PTWFE which can be found at:
http://www.shopsmith.com/academy/scrollsaw/index.htm#setup

Figure 15-1 (You can click it to enlarge it)

(In case you just want the simple answer it mounts to the lower output).

Ed

KUDOSEd

RED:)

thqnks for the help and also how hard is it to get a trip sander sander belt would rocklers have the belt and hoe long is the sander belt

thanks thad;)

[quote="tbergh"]thqnks for the help and also how hard is it to get a trip sander sander belt would rocklers have the belt and hoe long is the sander belt

thanks thad]
They are 42" x 1"(or 1/2"). SS sells them and they ARE reasonable!

thanks for the info which grits are the best for most woodworking
thanks thad

tbergh wrote:thanks for the info which grits are the best for most woodworking
thanks thad

Start with the assorted set(s). Then YOU can decide which is best for what YOU do. The finer grits are normally used for sharpening.

I have a chance to purchase a stand alone scroll saw for 200. Looks to be in excellant condition. Are you saying they will no longer be made? I thought this may be a great purchase but now I am wondering. Any info would be appreciated.
Thanks,
alisfair

I have a chance to purchase a stand alone scroll saw for 200. Looks to be in excellant condition. Are you saying they will no longer be made? I thought this may be a great purchase but now I am wondering. Any info would be appreciated.
Thanks,
alisfair