1954 Magna Engineering Corp Dealer Manual
Several months back, I acquired an old Magna dealer binder - everything you need to know to successfully sell Mark 5s through your independent hardware dealership. It really had some fascinating insights into the philosophy that Magna had for selling, and all the ways they were helping their dealers connect with potential customers, sell machines, and keep ‘em coming back for more. No social media or email - just good old-fashioned phone calls, postal mail, and face-to-face interaction!
I took the time to scan all the pages and organize them in the chapter order from the binder, and I invite you to take a look…
https://drive.google.com/drive/folders/ ... qZtOUS4UTV
.
1954 Shopsmith Dealer Manual Contents
Moderators: HopefulSSer, admin
1954 Shopsmith Dealer Manual Contents
John Dalton
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263334 (functionally restored)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1959 Mark 2, S/N 81940 (undergoing restoration)
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263334 (functionally restored)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1959 Mark 2, S/N 81940 (undergoing restoration)
- chapmanruss
- Platinum Member
- Posts: 3479
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: 1954 Shopsmith Dealer Manual Contents
John,
Thanks for sharing. Your copy of the Magna Engineering Corporation Confidential Dealers Book. Yours is in much better condition than mine. Yours also has the Schools section mine does not have which is interesting since mine is a later version with the name Magna Power Tool Corporation on the cover. Mine does have a section for Manuals. It includes the manuals for the Mark 5 (4-57), the Jigsaw (10-56), the Jointer (10-55), the Bandsaw (3-56), the Belt Sander (10-55), the Magna Sprayer (10-56), the Magna 9" Table Saw (9-56) and other miscellaneous instruction sheets.
The later Shopsmith Inc. Dealers Book I have from the 1970's included all the sections yours does and the Manuals section plus a Demonstration section. It has the manuals from that era for the Mark 5, Bandsaw, Belt Sander, Jigsaw and Jointer.
Everett had done a restoration of the Service Section from the Dealers Book provided by amboyna several years ago. His Dealers Book is closer to yours and in better condition than mine. His (amboyna's) has the same cover and has all the sections you provided plus his has the Manuals Section. I have a digital copy of his that he gave me.
Lots of great reference material in those Dealers Books.
Thanks for sharing. Your copy of the Magna Engineering Corporation Confidential Dealers Book. Yours is in much better condition than mine. Yours also has the Schools section mine does not have which is interesting since mine is a later version with the name Magna Power Tool Corporation on the cover. Mine does have a section for Manuals. It includes the manuals for the Mark 5 (4-57), the Jigsaw (10-56), the Jointer (10-55), the Bandsaw (3-56), the Belt Sander (10-55), the Magna Sprayer (10-56), the Magna 9" Table Saw (9-56) and other miscellaneous instruction sheets.
The later Shopsmith Inc. Dealers Book I have from the 1970's included all the sections yours does and the Manuals section plus a Demonstration section. It has the manuals from that era for the Mark 5, Bandsaw, Belt Sander, Jigsaw and Jointer.
Everett had done a restoration of the Service Section from the Dealers Book provided by amboyna several years ago. His Dealers Book is closer to yours and in better condition than mine. His (amboyna's) has the same cover and has all the sections you provided plus his has the Manuals Section. I have a digital copy of his that he gave me.
Lots of great reference material in those Dealers Books.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: 1954 Shopsmith Dealer Manual Contents
Mine has the Manuals section as well - I just didn’t bother to scan all those, or the various brochures that it also contains.
One big exception is the Magna 9-inch Saw, an owner’s manual for which I’d never seen. So I did scan that. It’s posted on Vintage Machinery, for anyone interested: http://www.vintagemachinery.org/mfginde ... =338&tab=3
.
John Dalton
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263334 (functionally restored)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1959 Mark 2, S/N 81940 (undergoing restoration)
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263334 (functionally restored)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1959 Mark 2, S/N 81940 (undergoing restoration)
Re: 1954 Shopsmith Dealer Manual Contents
Magna “thrifty-three” Brochure
(Low-budget Magna-Line!)
Something else very interesting that came out of the dealer binder is this brochure for the low-budget versions of the Magna-Line tools. Wow, these even look junky in the brochure! No wonder few if any have survived to today…
With this penchant for cheap knock-offs of their own tech, what would be next?! The Mark 5 Yugo edition??! Oh yeah… Mark 2…
.
(Low-budget Magna-Line!)
Something else very interesting that came out of the dealer binder is this brochure for the low-budget versions of the Magna-Line tools. Wow, these even look junky in the brochure! No wonder few if any have survived to today…
With this penchant for cheap knock-offs of their own tech, what would be next?! The Mark 5 Yugo edition??! Oh yeah… Mark 2…
.
John Dalton
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263334 (functionally restored)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1959 Mark 2, S/N 81940 (undergoing restoration)
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263334 (functionally restored)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1959 Mark 2, S/N 81940 (undergoing restoration)
- chapmanruss
- Platinum Member
- Posts: 3479
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: 1954 Shopsmith Dealer Manual Contents
John,
I don't think the Magna Line tools were a "cheaper" quality tool. I believe they were designed to fill a different part of the tool market for those wanting individual tools. I believe calling them the "Thrifty Three" was more for marketing. There were a pair of the Table Saws for sale near me about 5 years ago and I wish I had at least gone to see them in person.
Don't forget the Magna 12-1/2" Drill Press.
_ .
Other than the 5 SPT's (Jigsaw, Jointer, Bandsaw, Belt Sander and Magna Sprayer) available at the time the Magna Line Tools included those listed below.
Model 710 Magna 9” Tilt Arbor Bench Saw 71 000 (Floor Model - 71 008)
(Combination - 71 009 with Magna 4” Jointer 62 000 - SPT Mount)
Model 730 Magna 12-1/2” Drill Press 73 000
Model 735 Magna 12-1/2” Jig Saw 73 500
Model 740 Magna 30” Wood Lathe 74 000 (Floor Model - 74 008)
Model 745 Magna 4” Belt Sander 74 500
Model 780 Magna 10” Contractors Saw 78 000 (Floor Model)
As for the Mark 2 that is a different story.
I don't think the Magna Line tools were a "cheaper" quality tool. I believe they were designed to fill a different part of the tool market for those wanting individual tools. I believe calling them the "Thrifty Three" was more for marketing. There were a pair of the Table Saws for sale near me about 5 years ago and I wish I had at least gone to see them in person.
Don't forget the Magna 12-1/2" Drill Press.
_ .
Other than the 5 SPT's (Jigsaw, Jointer, Bandsaw, Belt Sander and Magna Sprayer) available at the time the Magna Line Tools included those listed below.
Model 710 Magna 9” Tilt Arbor Bench Saw 71 000 (Floor Model - 71 008)
(Combination - 71 009 with Magna 4” Jointer 62 000 - SPT Mount)
Model 730 Magna 12-1/2” Drill Press 73 000
Model 735 Magna 12-1/2” Jig Saw 73 500
Model 740 Magna 30” Wood Lathe 74 000 (Floor Model - 74 008)
Model 745 Magna 4” Belt Sander 74 500
Model 780 Magna 10” Contractors Saw 78 000 (Floor Model)
As for the Mark 2 that is a different story.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: 1954 Shopsmith Dealer Manual Contents
Generally, when people think of the Magna-Line tools, this is the image that comes to mind:chapmanruss wrote: ↑Sat Jan 14, 2023 2:25 pm I don't think the Magna Line tools were a "cheaper" quality tool.
. …cleverly designed, well-built tools (all the SPTs I run today are from that era, so let’s not forget: durable) being offered in stand-alone versions for those users without a Mark 5. I don’t think anyone would reasonably consider these cheaper quality, and I know I’ve never said that.
What I did say in my post above is that Magna demonstrated a “penchant for cheap knock-offs of their own tech”. The Mark 2 is a great example of this - a cheap knock-off of the Mark 5 by any measure! And as my earlier post in this thread points out, they did in fact make low-budget versions of a number of the starting lineup in the Magna-Line family, and even came up with the “thrifty” branding to avoid the understandable conclusion that these were “cheap” tools.
And they were cheap tools - look at these prices!
. $25 for a belt sander?! $28 for a jigsaw?! $67 for a table saw??!!
Even for the times, those are low-priced! The old adage of “you get what you pay for” I’m sure held true in those times, and the only way you get to that price point is reduce quality, just like they were going to do with the Mark 2, a year later.
So, while I absolutely believe Magna when they tell me that Magna-Line are “America’s Finest Power Tools” (I have to believe this, or my insatiable compulsion for collecting vintage Magna items will be rendered meaningless!), they absolutely had some cheapies in the lineup!
And for those with a keen eye, you may note the primary resources I use in this post include a Magna-Line part number missing from someone else’s list above. I guess we can all learn something…!
John Dalton
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263334 (functionally restored)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1959 Mark 2, S/N 81940 (undergoing restoration)
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263334 (functionally restored)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1959 Mark 2, S/N 81940 (undergoing restoration)
Re: 1954 Shopsmith Dealer Manual Contents
Flash-in-the-Magna-Line?!
One last note on the “Thrift Three” - they don’t appear to have stuck around long…
A July 1957 dealer reference mentions these low-end Magna-Line options, referring to them as “MAGNA-LINE TRAFFIC TOOLS”. I’m assuming that’s another way to kindly describe products at a low price point that can bring foot traffic to your store - anyone with retail experience out there who can substantiate this??
And by March 1958, they were gone from a similar reference. The market had spoken!
.
One last note on the “Thrift Three” - they don’t appear to have stuck around long…
A July 1957 dealer reference mentions these low-end Magna-Line options, referring to them as “MAGNA-LINE TRAFFIC TOOLS”. I’m assuming that’s another way to kindly describe products at a low price point that can bring foot traffic to your store - anyone with retail experience out there who can substantiate this??
And by March 1958, they were gone from a similar reference. The market had spoken!
.
John Dalton
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263334 (functionally restored)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1959 Mark 2, S/N 81940 (undergoing restoration)
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263334 (functionally restored)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1959 Mark 2, S/N 81940 (undergoing restoration)