Page 7 of 7
Re: Shopsmith Mark 5/V Bearings
Posted: Sun Oct 24, 2021 9:20 pm
by JPG
Maybe a moderator?
Re: Shopsmith Bearings
Posted: Mon Oct 25, 2021 7:56 am
by HopefulSSer
Thanks! Appreciate the tweak. But someone not paying attention or not familiar with bearings (guilty as charged on both counts
) could read that as all 6202 bearings have a 5/8" I.D. Maybe something like "Note: make sure 5/8" I.D., not 15mm"
Cheers!
Re: Shopsmith Bearings
Posted: Mon Oct 25, 2021 9:44 am
by edma194
Since
Bucksaw is no longer available, and if no one objects I'll extract the relevant posts from this thread and start a new one with the data organized both by part# and size. I believe default searches will show the most recent thread first and perhaps we can get a link into the
Everything Mark 5 / V - Technical info, documentation, links thread.
The thread will start with a few place holder posts for the re-organized data followed by the original posts for background. Hopefully you guys will proofread my work.
Re: Shopsmith Bearings
Posted: Mon Oct 25, 2021 10:04 am
by HopefulSSer
Sounds great! Thanks!
Re: Shopsmith Bearings
Posted: Mon Oct 25, 2021 12:39 pm
by jsburger
edma194 wrote: ↑Mon Oct 25, 2021 9:44 am
Since
Bucksaw is no longer available, and if no one objects I'll extract the relevant posts from this thread and start a new one with the data organized both by part# and size. I believe default searches will show the most recent thread first and perhaps we can get a link into the
Everything Mark 5 / V - Technical info, documentation, links thread.
The thread will start with a few place holder posts for the re-organized data followed by the original posts for background. Hopefully you guys will proofread my work.
Check Everett's Google drive. I believe he has already done that.
I just checked. He has a folder on his drive called "Bearings". It is worth checking before you go to all the time and trouble to recreate what has already been done.
Re: Shopsmith Bearings
Posted: Mon Oct 25, 2021 1:38 pm
by edma194
I did find that and don't see a need to go further. There is a chart at the end of the ShopSmith Bearings Guide with great detail, found at this link:
https://drive.google.com/file/d/0B1p8_y ... ptFgPzexcA
Perhaps a link can be added upthread or to the Everything Mark 5/V thread to point people there faster.