Shopsmith Forums

Would an epoxy repair of the band saw fence handle (Part 13) last?
The tension bolt and part of the handle broke off; I'm not sure coating both parts with epoxy and joining them would be a satisfactory repair because of the twisting force applied when tightening the fence handle.

[quote="wgander"]Would an epoxy repair of the band saw fence handle (Part 13) last?
The tension bolt and part of the handle broke off]

I have been unsuccessful using various epoxies when there will be pressure or a twisting action on the part. The new handle is less than $10 from Shopsmith so I would replace it. As a quick fix, I would use a piece of threaded rod with 2 nuts or a long bolt to replace the broken rod. Use a wrench on the nuts or bolt head to tighten/loosen the fence until you find a replacement. I have seen some beautiful hardwood handles made on the Shopsmith along with long bolts used for matching handles on the Shopsmith.

Thanks for confirming my suspicion.
...guess I'll have to start making up a shopping list...