A part of the fence on my 510 broke and isn't available from Shopsmith.
The broken part is #514259 (#219 in the schematics) and its the lever on the back of the fence which clamps to the rear support tube. I called Shopsmith and was told they no longer provide this part. The only suggestion they had was to upgrade to the 520 fence.
I wanted to ask if anyone here knows of any aftermarket part to replace it?
Broken 510 fence part
Moderators: HopefulSSer, admin
Re: Broken 510 fence part
I don't know of any but a used 510 fence from eBay should go for $50-$75. If you are in a pinch I have a spare 510 type fence I could take that piece from temporarily. It's an extra long fence made for the Sawsmith 2000 but not for my version so I don't use it.
I think a used one is a good deal because it gives you all the rest of the parts also.
I think a used one is a good deal because it gives you all the rest of the parts also.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Re: Broken 510 fence part
I'm pretty sure I have one in a box o' parts. I'll PM you if I can put my hands on it. Last year I made a 520 rip fence extension that uses 510 extrusions as its primary components. Some of it was odds and ends, but I'm pretty sure I disassembled a good 510 fence too.
ETA: Found it, I think. PM sent.
- David
ETA: Found it, I think. PM sent.
- David
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Broken 510 fence part
Since Shopsmith discontinued the Mark V 510 and 505 they no longer make replacement parts specific to that table system. As the stock runs out there are no more new OEM parts. It is the same thing we have seen with the discontinued Mark V 500, the Jig Saw and others. The used market is your best option. A quick search on ebay shows 5 currently for sale for just the fence, no tables, etc.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Broken 510 fence part
DLB,
I got your PM and tried to reply twice but both messages are stuck in my outbox. I'd like to get the part from you if you could send a picture of it just to be sure it's what I need.
I got your PM and tried to reply twice but both messages are stuck in my outbox. I'd like to get the part from you if you could send a picture of it just to be sure it's what I need.
Re: Broken 510 fence part
Sorry, 'stuck in outbox' is on me, I didn't log in. I've got one of those too, been in there for 11 months. I didn't see how to include a pic in a PM, so here is what I think is the part you need:
- David
- David