Has anyone used the IVAC Switch Box with a ShopSmith MarkV Model 510? I know you have to be careful using extension cords with the ShopSmith so I'm wondering if the IVAC Switch would introduce any power issues.
Thanks,
IVAC Switch Box on MarkV Model 510
Moderators: HopefulSSer, admin
IVAC Switch Box on MarkV Model 510
Greg
Mark V 510
With: 4" jointer, jig saw, surfacer planer, bandsaw
Mark V 510
With: 4" jointer, jig saw, surfacer planer, bandsaw
- twistsol
- Gold Member
- Posts: 225
- Joined: Mon Feb 22, 2016 9:35 pm
- Location: Cottage Grove, MN
- Contact:
Re: IVAC Switch Box on MarkV Model 510
I have used it. The one I had used two different power cords to run from two separate circuits. I ran 2 20amp cicuits to it and used it with my 510 and a Ridgid vac for a number of years with no issues.
Thanks much,
Chris Phelps
Cheap tools are too expensive
2x Mark 5 520 and a 10ER
Chris Phelps
Cheap tools are too expensive
2x Mark 5 520 and a 10ER
Re: IVAC Switch Box on MarkV Model 510
Thanks Chris! Good to know it will work.
Greg
Mark V 510
With: 4" jointer, jig saw, surfacer planer, bandsaw
Mark V 510
With: 4" jointer, jig saw, surfacer planer, bandsaw