Does anyone 3D print a table insert for the 555220 scroll saw? If you're out there please let me know. Otherwise I'll be making some out of some birch plywood that I hope I still have.
Thanks in advance.
Does anyone 3D print a table insert for the 555220 scroll saw?
Moderators: HopefulSSer, admin
-
- Bronze Member
- Posts: 1
- Joined: Wed Dec 20, 2023 8:53 pm
Re: Does anyone 3D print a table insert for the 555220 scroll saw?
Isn't that the same as 516173, the insert for the aluminum bandsaw table?
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Does anyone 3D print a table insert for the 555220 scroll saw?
It depends on which table it has. There were two different Tables for the gray Model 555220 Scroll Saw. The early Table used an insert (P/N 515196) similar, but not the same, as the Cast Iron Table Bandsaw. The later Table used a very similar insert (P/N 516061) but different in the opening for the blade then the Aluminum Table Bandsaw Insert (P/N 516173). The Insert from the Aluminum Table Bandsaw will fit the later Scroll Saw Table.
This is the early Table gray Scroll Saw.
_ .
This is the later Table gray Scroll Saw.
_
This is the early Table gray Scroll Saw.
_ .
This is the later Table gray Scroll Saw.
_
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Does anyone 3D print a table insert for the 555220 scroll saw?
I bought a package of PowerTec bandsaw zero clearance inserts a while back for the cast iron bandsaw table. They are 2-1/2" OD X 2-3/16" ID and fit will with a smidgeon of filing around the outside edge. If the scroll saw table is close they may work.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER