Page 1 of 1
SS PRO MODEL 514300 PARTS
Posted: Sun Sep 08, 2024 11:55 am
by Chuck
I recently purchased this SS Pro Planer and I am looking for a place to purchase parts:
1. Feed roller springs
2. Cutting Blades
3. Blade setting tool
Re: SS PRO MODEL 514300 PARTS
Posted: Sun Sep 08, 2024 12:03 pm
by JPG
Try Shopsmith(move quickly). If unsuccessful there is E-bay for good used parts - Slim pickens histotically.
Why do you need feed roller springs?
Re: SS PRO MODEL 514300 PARTS
Posted: Mon Sep 09, 2024 2:19 pm
by chapmanruss
The part number for the Knives is 505982 (was 513364 in older manuals) and is $109.95 for the set. It can be found at the link below.
https://www.shopsmith.com/product-page/ ... s-set-of-3
The part number for the Knife Setting Tool is 513414 and is $11.95. It can be found at the link below.
https://www.shopsmith.com/product-page/ ... ting-gauge
I'm not sure about Feed Roller Springs. I don't find a listing for them in the parts list. Is it for the infeed or outfeed roller?
I haven't needed to take my Pro Planer apart for repairs, so I am not as familiar with some of its parts as I am with most of the Shopsmith tools.
There is a Planer/Jointer Sharpening Jig (P/N 555471) that can be found at the link below which works great for sharpening your Planer and Jointer Knives yourself. It uses the Conical Sanding Disk which if you don't already have one, they sell the Jointer/Planer Knife Sharpening Jig Kit (P/N 555928) that comes with the Conical Sanding Disk and 3 Special Assorted Abrasives. The link for that is the second one below.
https://www.shopsmith.com/product-page/ ... pening-jig
https://www.shopsmith.com/product-page/ ... ng-jig-kit
I find it helpful to be able to sharpen Planer and Jointer Knives myself to save time and money sending them out or buying new knives.