Page 1 of 1
Talon Oneway Scroll Chuck Kits
Posted: Wed Nov 27, 2024 11:49 pm
by bgstraughan
Just bought the Talon Oneway Scroll Chuck Kits with the SS mounting piece from Lee Valley, for my Mark 5 SS and wondering if anyone has some input to share?
I'm hoping to make a bunch of Christmas presents in the near future.
Looking for some good ornament and other Christmas present ideas?
Something else I'm wondering, is how to drill into the end of a project, when it is mounted on the chuck, since there is no easy way to use the tailstock for that purpose?
Re: Talon Oneway Scroll Chuck Kits
Posted: Thu Nov 28, 2024 6:39 am
by RobertTaylor
I would reccomend a couple of youtube channels. Look for Mike Peace and The Wyoming woodturner. Both have good videos on making ornaments.
Re: Talon Oneway Scroll Chuck Kits
Posted: Thu Nov 28, 2024 7:23 am
by RFGuy
bgstraughan wrote: Wed Nov 27, 2024 11:49 pm
Something else I'm wondering, is how to drill into the end of a project, when it is mounted on the chuck, since there is no easy way to use the tailstock for that purpose?
You can purchase the tailstock arbor from Shopsmith (link below) and mount it in the tailstock. With this, you can attach the Shopsmith drill chuck to it and put a drill bit in it. Really easy to drill into a workpiece on the lathe. The drill bit remains stationary like this mounted in the tailstock and the workpiece spins instead.
https://www.shopsmith.com/product-page/ ... -all-marks
First time I had to drill into something on the lathe, was when making salt & pepper mills. Here is a really good instructional video that I used when I made them and it shows how to drill into them on the lathe. Fast forward to about 3:13 in the video to see the drill operation.
Re: Talon Oneway Scroll Chuck Kits
Posted: Thu Nov 28, 2024 7:29 am
by HopefulSSer
bgstraughan wrote: Wed Nov 27, 2024 11:49 pm
Something else I'm wondering, is how to drill into the end of a project, when it is mounted on the chuck, since there is no easy way to use the tailstock for that purpose?
Mount your drill chuck on this then put it in the tailstock. Feed the work into the drill bit to drill
https://www.shopsmith.com/product-page/ ... -all-marks
Re: Talon Oneway Scroll Chuck Kits
Posted: Fri Nov 29, 2024 7:57 pm
by bgstraughan
Wow! What a great idea. Thank you. Now the only thing I have to figure out is how to get one to Alberta, Canada? Seems Shopsmith won't ship here and the company that used to do Shopsmith's operations in Canada as closed up.
I also have an even bigger problem now. I just helped my son buy a used Shopsmith and to make it easier to take home, we took the top end off of the waytubes so we could remove the motor. But when the gentleman we bought it from tried to replace it, he broke the end on the whole end piece the holds the tubes together, the part that you locks them into place once it is lowered from the drill press mode!? Found the part on the parts diagram but not the part number and how do I buy and get it shipped?
Re: Talon Oneway Scroll Chuck Kits
Posted: Fri Nov 29, 2024 8:09 pm
by bgstraughan
Thanks Robert. I've watched and he's fun to watch.
Re: Talon Oneway Scroll Chuck Kits
Posted: Fri Nov 29, 2024 8:11 pm
by bgstraughan
Thank you RFGiuy.
Re: Talon Oneway Scroll Chuck Kits
Posted: Fri Nov 29, 2024 8:25 pm
by jsburger
bgstraughan wrote: Fri Nov 29, 2024 7:57 pm
Wow! What a great idea. Thank you. Now the only thing I have to figure out is how to get one to Alberta, Canada? Seems Shopsmith won't ship here and the company that used to do Shopsmith's operations in Canada as closed up.
I also have an even bigger problem now. I just helped my son buy a used Shopsmith and to make it easier to take home, we took the top end off of the waytubes so we could remove the motor. But when the gentleman we bought it from tried to replace it, he broke the end on the whole end piece the holds the tubes together, the part that you locks them into place once it is lowered from the drill press mode!? Found the part on the parts diagram but not the part number and how do I buy and get it shipped?
Got a Black Friday email from SS today. Seems like they are shipping outside the US now. Call customer service.
Re: Talon Oneway Scroll Chuck Kits
Posted: Sat Nov 30, 2024 12:00 pm
by BobCoates1953
Check Lee Valley for Beall Morse Taper Mandrels
Re: Talon Oneway Scroll Chuck Kits
Posted: Tue Dec 10, 2024 8:01 pm
by bgstraughan
Terrific, thanks for the information.