I'm pretty sure this is for my Shopsmith (500 upgraded to 510), but don't know what it's for. The diameter of the shaft is 1/2": too small for molder head, shaper cutters, or dado set.
[ATTACH]5267[/ATTACH]
Which arbor is this?
Moderators: HopefulSSer, admin
-
wgander
- Gold Member
- Posts: 179
- Joined: Sun Mar 02, 2008 2:35 pm
- Location: San Diego, CA/Kittanning, PA
- Contact:
Which arbor is this?
- Attachments
-
- Arbor.JPG (86.52 KiB) Viewed 7485 times
-
curiousgeorge
- Platinum Member
- Posts: 880
- Joined: Tue Feb 27, 2007 1:00 am
- Location: Fort Worth, Texas
That looks exactly like the arbor that came with my ShopSmith mount RingMaster.
Mike
Mike
Mike......... Rowlett, Texas, near Dallas
86 MK V 500/520. 59 MK 5 Greenie Shorty. SS Jointer, SS Planer,
SS Bandsaw, SS Lathe duplicator, SS Belt Sander,SS Molder & Shaper,
SS Tenon master jig, SS Mortising kit, SS 2 1/4' Drum Sanders, Ringmaster, DC3300....
86 MK V 500/520. 59 MK 5 Greenie Shorty. SS Jointer, SS Planer,
SS Bandsaw, SS Lathe duplicator, SS Belt Sander,SS Molder & Shaper,
SS Tenon master jig, SS Mortising kit, SS 2 1/4' Drum Sanders, Ringmaster, DC3300....
-
robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
That isn't made for the Shopsmith arbor. They do not normally tighten down in the flat properly. Those are very common at all tool sellers. Here is one page.
http://images.google.com/imgres?imgurl=http://www.grizzlyindustrial.com/images/pics/jpeg288/g/g5550.jpg&imgrefurl=http://www.grizzlyindustrial.com/products/Motor-Arbors-1-2-Motor-Arbor-1-2-R-H-/G5550&usg=__jtBWrpSl1VEitoDaZFCvvRuNiig=&h=288&w=288&sz=38&hl=en&start=4&um=1&tbnid=ZQNWD6xu2t9EvM:&tbnh=115&tbnw=115&prev=/images%3Fq%3Dmotor%2Barbor%26hl%3Den%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26sa%3DN%26um%3D1
http://images.google.com/imgres?imgurl=http://www.grizzlyindustrial.com/images/pics/jpeg288/g/g5550.jpg&imgrefurl=http://www.grizzlyindustrial.com/products/Motor-Arbors-1-2-Motor-Arbor-1-2-R-H-/G5550&usg=__jtBWrpSl1VEitoDaZFCvvRuNiig=&h=288&w=288&sz=38&hl=en&start=4&um=1&tbnid=ZQNWD6xu2t9EvM:&tbnh=115&tbnw=115&prev=/images%3Fq%3Dmotor%2Barbor%26hl%3Den%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26sa%3DN%26um%3D1
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
-
wgander
- Gold Member
- Posts: 179
- Joined: Sun Mar 02, 2008 2:35 pm
- Location: San Diego, CA/Kittanning, PA
- Contact:
which arbor?
No to the grinder/polisher.
Thanks, Mike: RingMaster. They got separated when I moved my tools; I try to keep things together.
Thanks, Mike: RingMaster. They got separated when I moved my tools; I try to keep things together.
-
JPG
- Platinum Member
- Posts: 34647
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
[quote="wgander"]No to the grinder/polisher.
Thanks, Mike: RingMaster. They got separated when I moved my tools]
I am Quite surprised it was a SS/Ringmaster standard issue! It looks like a "Craftsman catch all arbor" I purchased 40+ years ago! I drilled out the inboard hole and tapped it for 5/16-18 set screw(SS issue) and put the original set screws(both of them) in my misc. junk box. The original set screws were NOT 5/32 hex.
Thanks, Mike: RingMaster. They got separated when I moved my tools]
I am Quite surprised it was a SS/Ringmaster standard issue! It looks like a "Craftsman catch all arbor" I purchased 40+ years ago! I drilled out the inboard hole and tapped it for 5/16-18 set screw(SS issue) and put the original set screws(both of them) in my misc. junk box. The original set screws were NOT 5/32 hex.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange