Hope someone can help me here. I just bought a used ShopSmith MarkV that I haven't picked up yet and need to know the overall dimensions. I especially need the overall height to know if it will fit in the back of my minivan.
Thanks, Dave
O/A dimensions of a ShopSmith MarkV
Moderator: admin
-
shipwright
- Platinum Member
- Posts: 1160
- Joined: Tue Dec 15, 2009 7:28 pm
- Location: Vancouver Island, Canada
- Contact:
The legs come off very easily. I brought both of mine home (separately) in a volvo station wagon. And one had a bandsaw, a jointer, a belt sander, and a planer with it. The tailgate even closed. The minimum height is about 42". You probably don't even have to take the legs off, or at worst just one.
Paul M
Paul M
Paul M ........ The early bird gets the worm but the second mouse gets the cheese
Length = 72".
Height = 40".
Width = 19".
Height = 40".
Width = 19".
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
-
JPG
- Platinum Member
- Posts: 34923
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
shipwright wrote:The legs come off very easily. I brought both of mine home (separately) in a volvo station wagon. And one had a bandsaw, a jointer, a belt sander, and a planer with it. The tailgate even closed. The minimum height is about 42". You probably don't even have to take the legs off, or at worst just one.
Paul M
Removing the legs(five screws each) is quite easy and lowers the center of gravity. With the legs on, it is top heavy(not a problem until rapidly cornering!:eek:) Also it is easier to handle and you do not need to worry about bending them(if dropped due to handling 'difficulty').
It also reduces the length slightly.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
cocacola1012
- Gold Member
- Posts: 106
- Joined: Tue Nov 24, 2009 8:19 am
- Location: Virginia Beach, VA
cocacola1012 wrote:Width? Is that with or without table attached? I assume it is narrower with just the way tubes.
I did knot include the table, since it's easily removed.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
Thanks for all the feed back. I'll probably leave the legs on and use rachet straps to hold it in place while bringing it home. It should fit in the van easily.
Although I have several other wood working tools, this is my first Shopsmith, so I'm sure I'll be back on here with more questions as I clean up this machine and get to know it.
Thanks again for all of the information.
Although I have several other wood working tools, this is my first Shopsmith, so I'm sure I'll be back on here with more questions as I clean up this machine and get to know it.
Thanks again for all of the information.
PLEASE come back with more questions and pics.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
-
a1gutterman
- Platinum Member
- Posts: 3653
- Joined: Tue Jan 09, 2007 12:45 am
- Location: "close to" Seattle
We LIKE frequent posters!:Dbdad80 wrote:Thanks for all the feed back. I'll probably leave the legs on and use rachet straps to hold it in place while bringing it home. It should fit in the van easily.
Although I have several other wood working tools, this is my first Shopsmith, so I'm sure I'll be back on here with more questions as I clean up this machine and get to know it.
Thanks again for all of the information.
Tim
Buying US made products will help keep YOUR job or retirement funds safer.
Buying US made products will help keep YOUR job or retirement funds safer.
Dave,
One great reason to take the legs off. I wheeled mine to my chevy blazer, took one set of the wheels off, put the wheeless side on the tailgate, got inside the car through the side door, pulled it mostly in, took the other set off, push it all the way in, packed the wheels, bandsaw, jointer, jigsaw, etc etc etc, and drove it home. I was able to do it all by myself, and really never had to lift more than one end at a time.
One great reason to take the legs off. I wheeled mine to my chevy blazer, took one set of the wheels off, put the wheeless side on the tailgate, got inside the car through the side door, pulled it mostly in, took the other set off, push it all the way in, packed the wheels, bandsaw, jointer, jigsaw, etc etc etc, and drove it home. I was able to do it all by myself, and really never had to lift more than one end at a time.
Mark
8 miles north of the Ohio River, near Portsmouth, Ohio
Shopsmith Mark V (SS-68425)
bandsaw(SS-28617), jigsaw, 4 inch jointer, belt sander
8 miles north of the Ohio River, near Portsmouth, Ohio
Shopsmith Mark V (SS-68425)
bandsaw(SS-28617), jigsaw, 4 inch jointer, belt sander