Shopsmith's NEW Ceramic Sandpaper Discs
Posted: Wed Mar 10, 2010 7:25 pm
Received the following email today.
!! AMAZING NEW PRODUCT !!
Shopsmith's NEW Ceramic Sandpaper Discs
Fast-Cutting – Long-Lasting – Non-Clogging
These are clearly the carbide sawblades of abrasive discs!"
Jim McCann (Shopsmith's resident woodworking expert)_
Ceramic Sandpaper DiscsThis all-new ceramic grain-coated abrasive material was developed specifically for the commercial woodworking industry and, depending on the application, will easily deliver...
...Five to ten times the life of standard aluminum oxide abrasives!
Their performance is nothing short of AMAZING! The open-coat application of the particles to the rugged cloth backing resists clogging and extends Disc life well beyond what you could expect from more conventional abrasives. And, as described in the test results below, the super-sharp ceramic abrasive particles cut very quickly without burning the workpieces.
The 36 and 60-grit Discs are provided on a super-heavy "Y" weight PSA cotton-poly backing, while all other grits feature a heavy "X" weight cotton-poly backing.
We subjected these ceramic abrasive coated Discs to some truly brutal tests and they came through with flying colors on all fronts! Yes, they're a bit more costly than aluminum oxide... but you can believe us when we say... They're well worth it! Order yours today and prove it to yourself under our Risk-Free, 90-Day, Money-Back Guarantee!
Ceramic Abrasives Test Results
The following describes a series of six internal tests of these 12" Ceramic Abrasive Discs, conducted by Jim McCann, Shopsmith's resident woodworking expert. All tests were conducted in-house, using a single 100-grit 12" Ceramic Disc on the Shopsmith MARK V – at approximately 1,600 RPM
Test #1: 2" x 4" x 2' Knotty White Pine
Test #2: 1" x 3" x 2' Cherry
Test #3: 1" x 3" x 2' Hard Maple
Test #4: 2" x 4" x 2' Pressure Treated Yellow Pine
Test #5: 1" x 3" x 2' Red Oak
Test #6: 1" x 3" x 2' White Oak
In each of the tests above, we force-fed our workpieces into the rotating 100-grit Disc as quickly as possible, until the wood was sanded down to just 4" long.
The tests each required from four to eight minutes to complete... around 40 minutes for the complete series, after which our MARK V Headstock was quite warm.
As we completed each of the six tests, our Disc was holding (but not clogged with) sanding dust. It's interesting to note that each time we switched from wood-to-wood, the sawdust from each previous wood was actually displaced by the sawdust from the new wood. This demonstrated clearly that that sawdust was, in no case, adhering tightly to the abrasive particles. When we finished the 6-test series, we simply used an abrasive cleaning stick to remove all signs of sawdust from the Disk, and return it to like-new condition and color... almost as if it had never been used at all!
It's also important to note that at no time was there any evidence whatsoever of workpiece burning during or after completion of these tests. This is truly amazing, considering the speed at which we forced the stock into the rotating Disc.
All are Four-Disc Packages -- $24.84 each
556146 General Purpose Assortment
(One 80, one 100, two 120 grit)
556145 Four Grit Assortment
(One each, 60, 80, 100 & 120 grit) 556140 36 Grit (4 Discs)
556141 60 Grit (4 Discs)
556142 80 Grit (4 Discs)
556143 100 Grit (4 Discs)
556144 120 Grit (4 Discs)
CLICK HERE TO ORDER
Click Here To Access This Great Offer Now
http://www.shopsmith.com/ownersite/specials/7DT02.htm
Order Toll-Free by Phone, If You Prefer -- 1-800-543-7586
Call before 5:00 pm EST. Give your Shopsmith Representative this code...(7DT02) when calling.
Anyone know anything about this type of sandpaper?
!! AMAZING NEW PRODUCT !!
Shopsmith's NEW Ceramic Sandpaper Discs
Fast-Cutting – Long-Lasting – Non-Clogging
These are clearly the carbide sawblades of abrasive discs!"
Jim McCann (Shopsmith's resident woodworking expert)_
Ceramic Sandpaper DiscsThis all-new ceramic grain-coated abrasive material was developed specifically for the commercial woodworking industry and, depending on the application, will easily deliver...
...Five to ten times the life of standard aluminum oxide abrasives!
Their performance is nothing short of AMAZING! The open-coat application of the particles to the rugged cloth backing resists clogging and extends Disc life well beyond what you could expect from more conventional abrasives. And, as described in the test results below, the super-sharp ceramic abrasive particles cut very quickly without burning the workpieces.
The 36 and 60-grit Discs are provided on a super-heavy "Y" weight PSA cotton-poly backing, while all other grits feature a heavy "X" weight cotton-poly backing.
We subjected these ceramic abrasive coated Discs to some truly brutal tests and they came through with flying colors on all fronts! Yes, they're a bit more costly than aluminum oxide... but you can believe us when we say... They're well worth it! Order yours today and prove it to yourself under our Risk-Free, 90-Day, Money-Back Guarantee!
Ceramic Abrasives Test Results
The following describes a series of six internal tests of these 12" Ceramic Abrasive Discs, conducted by Jim McCann, Shopsmith's resident woodworking expert. All tests were conducted in-house, using a single 100-grit 12" Ceramic Disc on the Shopsmith MARK V – at approximately 1,600 RPM
Test #1: 2" x 4" x 2' Knotty White Pine
Test #2: 1" x 3" x 2' Cherry
Test #3: 1" x 3" x 2' Hard Maple
Test #4: 2" x 4" x 2' Pressure Treated Yellow Pine
Test #5: 1" x 3" x 2' Red Oak
Test #6: 1" x 3" x 2' White Oak
In each of the tests above, we force-fed our workpieces into the rotating 100-grit Disc as quickly as possible, until the wood was sanded down to just 4" long.
The tests each required from four to eight minutes to complete... around 40 minutes for the complete series, after which our MARK V Headstock was quite warm.
As we completed each of the six tests, our Disc was holding (but not clogged with) sanding dust. It's interesting to note that each time we switched from wood-to-wood, the sawdust from each previous wood was actually displaced by the sawdust from the new wood. This demonstrated clearly that that sawdust was, in no case, adhering tightly to the abrasive particles. When we finished the 6-test series, we simply used an abrasive cleaning stick to remove all signs of sawdust from the Disk, and return it to like-new condition and color... almost as if it had never been used at all!
It's also important to note that at no time was there any evidence whatsoever of workpiece burning during or after completion of these tests. This is truly amazing, considering the speed at which we forced the stock into the rotating Disc.
All are Four-Disc Packages -- $24.84 each
556146 General Purpose Assortment
(One 80, one 100, two 120 grit)
556145 Four Grit Assortment
(One each, 60, 80, 100 & 120 grit) 556140 36 Grit (4 Discs)
556141 60 Grit (4 Discs)
556142 80 Grit (4 Discs)
556143 100 Grit (4 Discs)
556144 120 Grit (4 Discs)
CLICK HERE TO ORDER
Click Here To Access This Great Offer Now
http://www.shopsmith.com/ownersite/specials/7DT02.htm
Order Toll-Free by Phone, If You Prefer -- 1-800-543-7586
Call before 5:00 pm EST. Give your Shopsmith Representative this code...(7DT02) when calling.
Anyone know anything about this type of sandpaper?