Purchased a Kreg bandsaw re-sawing guide from Shopsmith and installed it on my old bandsaw fence. I had to drill two slots in the fence and two additional holes in the re-sawing guide. The Kreg fence sure would be nice but this should get me buy for now.
I drilled the Shopsmith fence using the Shopsmith and the holes/slots didn't come out quite as straight as I wanted but it works. The slots let me adjust the guide for different width blades from 1/4" to 5/8". The diagram in the Kreg instructions is a little confusing but I think I finally got it right, the center of the guide leads the blade by 1/4"
Jim in Tucson
[ATTACH]335[/ATTACH]
Jig on fence
[ATTACH]336[/ATTACH]
Slots drilled in fence
Kreg Re-sawing Guide
Moderators: HopefulSSer, admin
-
james.miller
- Gold Member
- Posts: 303
- Joined: Thu Jul 20, 2006 2:16 pm
Kreg Re-sawing Guide
- Attachments
-
- Resaw1.jpg (66.64 KiB) Viewed 5526 times
-
- Resaw2.jpg (62.46 KiB) Viewed 5553 times
-
- Resaw3.jpg (57.26 KiB) Viewed 5551 times