Shopsmith Forums

Looking for someone who has a 555995 pro router table they don't use and are willing to part with. I read some posts about just purchasing the rails and making my own table, but customer service said they don't sell just the rails. Maybe they did at one time. So I'm on the hunt for the whole thing used if I can find it. Thanks!

The part numbers for the front and rear rails are 521922 and 521920 respectively. They may not sell them but they are shown in the documentation.

These rails differ from those used in the 520 configuration only in length. The ones used on the ProRouter Table are 19" long while those on the 520 Main Table are only 17 1/2" long.

The predrilled holes for mounting to the table are probably different also.

The front and rear rails for the Main Table are 522298 and 5184909.

The shorter rails for a Floating Table are 522297 and 518291.

If a table longer than could be mounted with the Main Table rails was needed, the rails could be combined. The shorter rails are about 7" in length.