Page 1 of 1
Headstock Temperature
Posted: Fri Aug 26, 2011 11:32 pm
by woodhead
what is the general temp of the headstock around the bearing areas and motor. My unit runs at about 127 degrees F with ambient of 97 to 102 degrees F. Is this 30 degree temp rise ok?
Posted: Fri Aug 26, 2011 11:39 pm
by JPG
woodhead wrote:what is the general temp of the headstock around the bearing areas and motor. My unit runs at about 127 degrees F with ambient of 97 to 102 degrees F. Is this 30 degree temp rise ok?
I would not say it is 'unusual'.
Posted: Sat Aug 27, 2011 6:32 pm
by charlese
woodhead wrote:what is the general temp of the headstock around the bearing areas and motor. My unit runs at about 127 degrees F with ambient of 97 to 102 degrees F. Is this 30 degree temp rise ok?
What part of the World is your machie located? Is it always in the shade?
Posted: Tue Sep 06, 2011 10:17 pm
by woodhead
I am in Odessa, TX and I do try to keep it in the shade; the temperature is in my well ventilated shop, only conditioning is open more doors. The headstock seemed to overheat when I was running vertical at high speed doing some light router work on cabinet doors. I guess I will see if it does the same this fall when it cools down.
Thanks for all the info, I really ENJOY FOLLOWING SOME OF THE ITEMS POSTED. Watch and listen, a good way to learn.