Bandsaw compatibility
Posted: Sat Nov 26, 2011 1:03 pm
Is a Mark V manufactured in 1989 compatible with a ShopSmith bandsaw built in 1979?
Shopsmith Forums
A woodworking forum for woodworking hobbyist and woodworking projects related and unrelated to the Shopsmith MARK V
https://forum.shopsmith.com/
Bandsaw compatibility
Page 1 of 3
Posted: Sat Nov 26, 2011 1:15 pm
Yes, it is and it's also compatible with other Shopsmith Special Purpose Tools.
Posted: Sat Nov 26, 2011 2:46 pm
The only 'exceptions' are a model 10E or 10ER. With the Mark 5 the SPT's were conceived and are 'compatible' to all variations since.
The considerations are mounting and power hookup. Those areas have not changed.
The considerations are mounting and power hookup. Those areas have not changed.
MChristopher
Posted: Sat Nov 26, 2011 4:57 pm
Many thx for the info concerning the bandsaw.
10ER compatibility question
Posted: Sun Nov 27, 2011 2:13 am
I've seen emphatic "no" and emphatic "yes" answers to the question whether the 10ER will work with the bandsaw. There are definitely 10ERs running bandsaws. Are they running different, 10ER-specific bandsaws, or do they in fact run with the bandsaws currently being sold? Anybody know for sure? I'd sure like a bandsaw for my 10ER. 
v/r,
Rick
v/r,
Rick
Posted: Sun Nov 27, 2011 9:30 am
If you join the 10ER group on Yahoo, you can look through the files there and locate a wooden adapter someone made that will enable you to mount Shopsmith Special Purpose Tools, including the bandsaw, on the 10ER. Metal adapters made by Shopsmith years ago also might be available via E-bay but are rare.
Posted: Sun Nov 27, 2011 9:41 am
chipmaster wrote:I've seen emphatic "no" and emphatic "yes" answers to the question whether the 10ER will work with the bandsaw. There are definitely 10ERs running bandsaws. Are they running different, 10ER-specific bandsaws, or do they in fact run with the bandsaws currently being sold? Anybody know for sure? I'd sure like a bandsaw for my 10ER.
v/r,
Rick
Hi Rick:
There are adapters available from third party folks to use Mark V items on a 10-ER. Ebay is one source. There are also some folks that make their own adapters. Using the "search" function on this forum should give you some discussions and pictures of them.
I have not paid much attention to them since I have no plans to use any of them on my 10-ER. I have the SS disease bad enough that I have plenty of Mark V's and Mark VII's for that.
One small surprise I got when I bought my 10-ER was how much heavier it is than the Mark V's. I had been loading Mark V's and the 10-ER made me grunt.
I would highly recommend the 10-ER list on Yahoo (in addition to, not instead of) this forum. I am currently sat as "no mail" there right now but I like to jump back on there as active now and then so I like to stay as a member. Skip runs a great list.
Posted: Sun Nov 27, 2011 12:23 pm
chipmaster wrote:I've seen emphatic "no" and emphatic "yes" answers to the question whether the 10ER will work with the bandsaw. There are definitely 10ERs running bandsaws. Are they running different, 10ER-specific bandsaws, or do they in fact run with the bandsaws currently being sold? Anybody know for sure? I'd sure like a bandsaw for my 10ER.
v/r,
Rick
'Stock' Model 10 - NO!;) <<<<<< However there are(rarely encountered) adapters that I think Magna Engineering did manufacture.
'Modified' Model 10 - Anything 'possible' with a mod that will work!
Posted: Sun Nov 27, 2011 12:33 pm
Is there a "short list" of issues that make stock SPT incompatible to a 10/10E/10ER?
KEY WORD: "short list"
KEY WORD: "short list"
Posted: Sun Nov 27, 2011 12:55 pm
dusty wrote:Is there a "short list" of issues that make stock SPT incompatible to a 10/10E/10ER?
KEY WORD: "short list"
No mounting holes to put the post in and no left side 5/8" spindle.
.