Page 2 of 2
Posted: Thu Sep 30, 2010 11:16 pm
by RobertTaylor
shopsmith no longer sells a pen mandrel. however any place that sells mandrels will have a straight shaft mandrel that can be used with your drill chuck or the shopsmith 1/4" router chuck. pennstate industries also sells a mandrel with a 5/8" bore that can be used on all shopsmiths.
Posted: Fri Oct 01, 2010 9:39 am
by rkh2
Here is the information for the mandrel that fits the Shopsmith.
This is at Penn State Industries
Universal Lathe Pen Mandrel Set: For 5/8" Shopsmith
Item #: PKM-CL
$17.95
Reg. Price: $24.95
You Save: $7.00
Posted: Fri Oct 01, 2010 9:44 am
by wa2crk
Boostfan;
If you have a pen mandrel with a #2 Morse taper double nut the threaded end and hold the nuts in a vice then you will be able to unscrew the tapered end from the shaft. The shaft can be held in the SS drill chuck.
Bill V
Posted: Wed Oct 06, 2010 1:43 pm
by markap
rkh2 wrote:Here is the information for the mandrel that fits the Shopsmith.
This is at Penn State Industries
Universal Lathe Pen Mandrel Set: For 5/8" Shopsmith
Item #: PKM-CL
$17.95
Reg. Price: $24.95
You Save: $7.00
I have this one - it works well and the rod (mandrel) is replaceable if it gets bent.
Have you tried the Linseed Oil/CA glue finish? It's one of my favorites now for a durable high gloss finish on pens.
Posted: Wed Oct 06, 2010 3:48 pm
by rkh2
Originally posted by markap
Have you tried the Linseed Oil/CA glue finish? It's one of my favorites now for a durable high gloss finish on pens.
Are you talking about the One-Step Plastic Polish that Penn State offers? I haven't tried it but may look into it. I currently use Mylands friction polish and then the Beal buffing system.
Boiled Linseed Oil and CA Glue Finish
Posted: Wed Oct 06, 2010 4:52 pm
by MikeG
Here is a video of a blo /ca finish for pens, or you could search google for blo /ca finish as there are variations of how it can be done. some people will sand between layers to get rid of any ridges. Good luck.
http://www.youtube.com/watch?v=orcgOf4siqc