Heads Up - Bargain 'available'

JPG

An interesting 'extra'!

retiredsoldier919

Here's a $50 greenie in on in Wilton, CT.

http://newyork.craigslist.org/fct/tls/5623131482.html

ERLover

JPG wroteAn interesting 'extra'!

First off the guy that delivered the ER, it was his dads, bought it new.

The Serial # is R58616.1951 vintage.

He was a farmer that could anything, and most had to.

That Tool Craft Shaper, we thought was on a shelf, was not, he welded up a frame on the bottom, then welded 2 pipes to it to slide into the way tubes.

You should see the "Chop Saw" rig he made up to use in conjunction with the ER table. It would be on the pic that was posted from CL. the saw is an old hand held circle saw.

I am going out tonight, but may have time for some pics when I get home, otherwise tomorrow.

ERLover

If you lok at the CL pic, that black thing in front of the chisel rack is the Craftsman circle saw that he attached to a home made frame.

ERLover

lyall wroteERLover glad to help.

Need pictures of it when you get it or after you clean and fixed it up.

someday I will get a 10e or 10er.

Lyall, this thing is clean and basically rust free, just a wipe down with mineral spirits to remove some saw dust gunk, a wipe down and waxing of the way tubes, and new belts. Any new thing about this will be out of here and in a Thread in Community.

retiredsoldier919

JPG wroteAs suggested by Admin, I create this thread for the purpose of posting notice of bargains available on cl and e-bay etc.

Since Admin has made this a sticky post, I feel a need to state the following.

This thread is meant to provide an easily 'found' place to both post and discover items that seem to be a good bargain while precluding those posts elsewhere. This applies to SPTs as well as base machines and major 'accessories'.

It's intent is to eliminate such posts elsewhere.

We need to be careful to not use this as a 'Trading post' since that is specifically a denied use of this forum.

To be blunt, all posts must not be of anything the poster has a financial interest in.

It's a shame that trading is not allowed. I still haven't seen that in writing though.

JPG

retiredsoldier919 wrote
JPG wroteAs suggested by Admin, I create this thread for the purpose of posting notice of bargains available on cl and e-bay etc.

Since Admin has made this a sticky post, I feel a need to state the following.

This thread is meant to provide an easily 'found' place to both post and discover items that seem to be a good bargain while precluding those posts elsewhere. This applies to SPTs as well as base machines and major 'accessories'.

It's intent is to eliminate such posts elsewhere.

We need to be careful to not use this as a 'Trading post' since that is specifically a denied use of this forum.

To be blunt, all posts must not be of anything the poster has a financial interest in.
It's a shame that trading is not allowed. I still haven't seen that in writing though.

A matter of intention/intent. FWIW the sponsor has been very tolerant. We do not want to cause that to change.

Establishing a 'Trading post' thread has been specifically denied(AIUI)

skou

JPeG, a trading post has NOT been eliminated, for a few of the

"antique" Shopsmith models. Like my Model 10 stuff.

The radial arm saw, and the stand-alone table saw come

to mind. MotherShip is NOT selling anything for those

models.

I'd JUMP at a chance to get ANYTHING for my old tools!

steve

ERLover

Skou/Steve, I tried to call you last night, but your # is not the same.

Big day today, got that pristine ER delivered, with a working SC for $220, a, $200 asking 200$ but saved me that in gas so I gave him a 20. IT is pristine, and a SC on it!!!!

Another one saved, his dad bought it new, in 1951

We have to meet up in person some day, on my bucket list :D and JPG :eek:

ERLover

Steve this is the one, like kid in a candy store!!!!

lyall

https://monterey.craigslist.org/tls/5611450150.html

Shopsmith 10e - $180 (Hollister, Ca)

ERLover

lyall wrotehttps://monterey.craigslist.org/tls/5611450150.html

Shopsmith 10e - $180 (Hollister, Ca)

[attachment=0]10e.png[/attachment]

YOU GOT TO BE KIDDING ME :eek:

Steve/Skou may take a road trip.

A few hours drive from my Bro.

JPG

It is an ER.

Beave2012

Not sure how great if a deal it is at $400, but it's a very clean looking mark vii.

http://minneapolis.craigslist.org/csw/tls/5638969017.html

JPG

Looks good in the pix. Wonder re the plastic stuff. No casters though.

ERLover

I dont see them very often, but I think $100 too much, I can get a MV with some SPTs for $300 around here ;)

robinson46176

JPG wroteLooks good in the pix. Wonder re the plastic stuff. No casters though.

Maybe the automotive creeper under it comes with it... :)

.

skou

JPG wroteIt is an ER.

JPeG, until we see the nameplate, we can't be sure.

When I got Model 10 #1, it had ALL the ER parts,

but it was, in fact, an E model. (Had the E model

extension table bracket, and tailstock.)

Back then, the "internet" had still not been "discovered"

by Al Gore. (But, he HAD invented "global warming" by

then.) (That one is gonna leave some marks!)

steve

JPG

skou wrote
JPG wrote
It is an ER.

JPeG, until we see the nameplate, we can't be sure.

When I got Model 10Main Woodworking Forum, it had ALL the ER parts,

but it was, in fact, an E model. (Had the E model

extension table bracket, and tailstock.)

Back then, the "internet" had still not been "discovered"

by Al Gore. (But, he HAD invented "global warming" by

then.) (That one is gonna leave some marks!)

steve

I was going by the spring housing as well as all the other stuff.

The name plates are not reliable anyway. Many ERs have E plates.

ER spring housing.jpg

ERLover

Not a bad deal.

http://milwaukee.craigslist.org/tls/5640927231.html

« Previous Page Next Page »