Search found 2619 matches

by Hobbyman2
Wed Jan 25, 2023 5:22 pm
Forum: Beginning Woodworking
Topic: Newbie, looking for a little info
Replies: 15
Views: 552

Re: Newbie, looking for a little info

JMO You mentioned you have health issues , so when selecting the machine that would be best for you IMO first and for most for me would be creature comforts and safety issues , the MKV 510 has a larger table that gives you a lot more surface area . that means less physical intervention when lifting ...
by Hobbyman2
Sat Jan 21, 2023 10:23 pm
Forum: Community
Topic: Don't Know Why
Replies: 15
Views: 1113

Re: Don't Know Why

I would still be using 98 if I could , It didnt have a bunch of stuff in it that to me is useless .
by Hobbyman2
Thu Jan 19, 2023 12:54 am
Forum: General Woodworking
Topic: Routing a moulding
Replies: 25
Views: 5758

Re: Routing a moulding

Thank you for the information. I understand that when cutting wood, a thin piece can become unstable and potentially explode or kick back if the grain direction changes, particularly when cutting along the grain of the wood. ============= If you cut the profile and than cut the thin piece off you c...
by Hobbyman2
Wed Jan 18, 2023 7:02 pm
Forum: General Woodworking
Topic: Resawing - cut results - one face smooth, the other face rought
Replies: 4
Views: 242

Re: Resawing - cut results - one face smooth, the other face rought

In my past experience with bandsaw blades , if the kerf on one side is not the same your cut will not be true and it will be very tough to keep the cut on the cutline or the blade from binding . moisture content can also effect the cut . most blades will not clean the saw dust from the blade and or ...
by Hobbyman2
Tue Jan 17, 2023 6:35 pm
Forum: Maintenance and Repair
Topic: Slop in the Rails Adversly Effects Alignment
Replies: 26
Views: 756

Re: Slop in the Rails Adversly Effects Alignment

JMO ,,,,, tossing mud on the wall as they say , once my main table is aligned I slide the main table and carriage to the ext table on both ends of the SS and align the ext tables to the main table , this has all ways proven to be some what reliable for alignment of the ext tables for me ,, any minor...
by Hobbyman2
Tue Jan 17, 2023 6:09 pm
Forum: Beginning Woodworking
Topic: Saying Hello from England
Replies: 32
Views: 16564

Re: Saying Hello from England

javaise wrote: Sun Jan 15, 2023 1:56 am Hi everyone I am also newbie here and trying to learn something new about woodworking....
==============

Hello ,,, where in England ?
by Hobbyman2
Sun Jan 15, 2023 8:01 pm
Forum: General Woodworking
Topic: Run Bandsaw and Joiner Together
Replies: 15
Views: 4117

Re: Run Bandsaw and Joiner Together

we went with a power station and found it was a very good option, it does take a little room but the benefits are worth it .
by Hobbyman2
Wed Jan 11, 2023 10:53 pm
Forum: Woodworking Tool Review
Topic: Jessem Loose Tenon Jig
Replies: 43
Views: 2980

Re: Jessem Loose Tenon Jig

very very sharp tools , good lighting ,practice and patience .
by Hobbyman2
Wed Jan 11, 2023 8:02 am
Forum: Woodworking Tool Review
Topic: Jessem Loose Tenon Jig
Replies: 43
Views: 2980

Re: Jessem Loose Tenon Jig

Years ago I started using floating tenons and making spline joints, it was time consuming because I made the tenons and splines , I switched to biscuits on some projects instead of splines on the projects that were acceptable, gluing up panels and large long corners etc , I have also used connectors...
by Hobbyman2
Mon Jan 09, 2023 8:28 am
Forum: Maintenance and Repair
Topic: Table saw blade cover anti-kick back feature jams
Replies: 12
Views: 472

Re: Table saw blade cover anti-kick back feature jams

maybe something is sprung or twisted out of place and can be sprung back or re straightened ? .