Search found 1908 matches
- Tue Apr 30, 2024 6:34 pm
- Forum: Community
- Topic: I got a new to me mark
- Replies: 19
- Views: 966
Re: I got a new to me mark
This link should take you to a Rip-Strate manual download: download/file.php?id=52836
- Tue Apr 30, 2024 5:14 pm
- Forum: Community
- Topic: I got a new to me mark
- Replies: 19
- Views: 966
Re: I got a new to me mark
#8 is a morticing attachment. Not sure what is sticking out of the bottom. #7 is the hold down for the morticing attachment. #5 is a Rip-Strate. Not made anymore, it's a device to aid ripping boards by keeping them along the fence and stopping kickback. #4, not sure. Might be part of the morticing a...
- Fri Apr 26, 2024 7:00 pm
- Forum: Maintenance and Repair
- Topic: Loose Drive Assembly where Tool Attach
- Replies: 3
- Views: 297
Re: Loose Drive Assembly where Tool Attach
In what way is it loose? Is the drill chuck loose on the main spindle? Does the entire quill move side to side or up and down?
- Wed Apr 24, 2024 2:16 pm
- Forum: General Woodworking
- Topic: Apprenticeship
- Replies: 4
- Views: 764
Re: Apprenticeship
Here is the OP's website, RVP1875: https://www.rvp1875.com/
I'd love to apply myself but I don't fit the qualifications. I have the work ethic, but the labor part ain't so good lately.
I'd love to apply myself but I don't fit the qualifications. I have the work ethic, but the labor part ain't so good lately.
- Thu Apr 18, 2024 4:39 pm
- Forum: Beginning Woodworking
- Topic: SS 500 Router function?
- Replies: 7
- Views: 1650
Re: SS 500 Router function?
I don't know what you mean by " double-rack mounting tubes" My SS looks like any typical 5XX series, with 4 tubes. Two lower and two upper. I'd love to have the newer tables, but that's a bit of a $$ for me. In under table operations (inverted drill press mode) the standard table will be ...
- Wed Apr 17, 2024 9:43 am
- Forum: Maintenance and Repair
- Topic: Adding dustport to older bandsaw
- Replies: 2
- Views: 243
Re: Adding dustport to older bandsaw
Yes. Buy the dust port for a band saw from Shopsmith. They have an entire upgrade that includes a left side cover with the port and a window for the tension arm, or you can just buy the port, cut a hole in the cover and install it yourself. Adding a window a piece of clear plastic to see the tension...
- Tue Apr 16, 2024 5:00 pm
- Forum: Community
- Topic: Mark v speed controller problem
- Replies: 4
- Views: 788
Re: Mark v speed controller problem
Majjr, here is a link to Bill Mayo's headstock improvement guide: (download/file.php?id=34357)
I found that in this thread: viewtopic.php?p=314807#p314807
Look around on the forum and you should find other references to this.
I found that in this thread: viewtopic.php?p=314807#p314807
Look around on the forum and you should find other references to this.
- Tue Apr 16, 2024 1:46 pm
- Forum: Community
- Topic: Mark v speed controller problem
- Replies: 4
- Views: 788
Re: Mark v speed controller problem
If the quadrant that pushes on the bearing is not centered and perpendicular to the shaft on the upper sheaves you'll need excessive force on the speed dial to move the sheaves. Also, the outer sheave has to slide on the shaft to change speeds, if that's not sliding smoothly it could require excessi...
- Tue Apr 16, 2024 7:56 am
- Forum: Maintenance and Repair
- Topic: New Owner to 2 Shopsmiths
- Replies: 3
- Views: 328
Re: New Owner to 2 Shopsmiths
A 510 with a bandsaw and joiner for $50 is a fantastic deal. Tailstocks are all interchangeable. You will want a 12" sanding disc, it is one of the best features of a Shopsmith.
- Tue Apr 16, 2024 5:33 am
- Forum: Community
- Topic: Heads Up - Bargain 'available'
- Replies: 2384
- Views: 3728666
Re: Heads Up - Bargain 'available'
Sawsmith RAS - $275 - Southern MA - https://southcoast.craigslist.org/tls/d ... 27471.html
Includes dado blade, molder head with a few cutters, drill chuck, and a new belt.
Includes dado blade, molder head with a few cutters, drill chuck, and a new belt.