Why do you use ZCI?
Moderator: admin
So HOW do you people make yours? What thickness of material do ya use?
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
-
Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
Dusty
I use ZCI for three reasons maybe four.
To prevent something slipping between the blade and the table
To prevent tear out
To improve dust collection. You must also include a upper blade guard dust collection system.
And the last reason for safety
Just thought of a fifth with a fresh ZCI in know exactly where the saw kerf will be.
I use ZCI for three reasons maybe four.
To prevent something slipping between the blade and the table
To prevent tear out
To improve dust collection. You must also include a upper blade guard dust collection system.
And the last reason for safety
Just thought of a fifth with a fresh ZCI in know exactly where the saw kerf will be.
Ed in Tampa
Stay out of trouble!
Stay out of trouble!
Beeg, I simply rip the material (plywood, hardboard, laminate flooring, or something else) to width and then use a Shopsmith insert to trace its outline on the blank. Then it's to the bandsaw to cut the arc(s) and then to the disk sander to fit the blank into the saw table opening. As it likely is too thick, I use a router table to cut a rabbet around the edge of the blank. If too thin, add something to shim the blank like veneer, DYMO plastic self-stick labeling tape, or some thing else to get it flush with the table top. Then drill and countersink for the screws.
They're really quick and easy to make and it's best to make a few at the same time to take advantage of the various set-ups.
They're really quick and easy to make and it's best to make a few at the same time to take advantage of the various set-ups.
Art in Western Pennsylvania
-
robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
dusty wrote:How is laminate flooring different than baltic birch plywood cut-offs?
The flooring is much better for me in a huge way... I "have" the laminate flooring on hand for almost free...
I don't have any Baltic Birch plywood on hand. .
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
Hi,
I don't know if most or any of you look father down on the thread page, if you don't you might want to.
This is what I'm talking about:
[ATTACH]15212[/ATTACH]
It gives you more associated reading if you care to. It is also nice to search on zci where you will find a LOT more posts. We really have a library of information here at the forums if you care to look around a bit.
Ed
I don't know if most or any of you look father down on the thread page, if you don't you might want to.
This is what I'm talking about:
[ATTACH]15212[/ATTACH]
It gives you more associated reading if you care to. It is also nice to search on zci where you will find a LOT more posts. We really have a library of information here at the forums if you care to look around a bit.
Ed
- Attachments
-
- ScreenHunter_03 Dec. 12 13.38.jpg (33.83 KiB) Viewed 1648 times
-
dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
I'll be darned. Has that feature always been there?reible wrote:Hi,
I don't know if most or any of you look father down on the thread page, if you don't you might want to.
This is what I'm talking about:
[ATTACH]15212[/ATTACH]
It gives you more associated reading if you care to. It is also nice to search on zci where you will find a LOT more posts. We really have a library of information here at the forums if you care to look around a bit.
Ed
o:o"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.